Fossil

$(OBJDIR)/default_css.h:	$(SRCDIR)/default_css.txt $(OBJDIR)/mkcss
	$(OBJDIR)/mkcss $(SRCDIR)/default_css.txt $(OBJDIR)/default_css.h

# Setup the options used to compile the included SQLite library.
SQLITE_OPTIONS = -DNDEBUG=1 \
                 -DSQLITE_THREADSAFE=0 \

                 -DSQLITE_DEFAULT_MEMSTATUS=0 \
                 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 -DSQLITE_OMIT_DECLTYPE \
                 -DSQLITE_OMIT_DEPRECATED \
                 -DSQLITE_OMIT_GET_TABLE \
                 -DSQLITE_OMIT_PROGRESS_CALLBACK \
................................................................................
                 -DSQLITE_HAVE_ZLIB \
                 -DSQLITE_INTROSPECTION_PRAGMAS \
                 -DSQLITE_ENABLE_DBPAGE_VTAB

# Setup the options used to compile the included SQLite shell.
SHELL_OPTIONS = -DNDEBUG=1 \
                -DSQLITE_THREADSAFE=0 \

                -DSQLITE_DEFAULT_MEMSTATUS=0 \
                -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                -DSQLITE_OMIT_DECLTYPE \
                -DSQLITE_OMIT_DEPRECATED \
                -DSQLITE_OMIT_GET_TABLE \
                -DSQLITE_OMIT_PROGRESS_CALLBACK \

$(OBJDIR)/default_css.h:	$(SRCDIR)/default_css.txt $(OBJDIR)/mkcss
	$(OBJDIR)/mkcss $(SRCDIR)/default_css.txt $(OBJDIR)/default_css.h

# Setup the options used to compile the included SQLite library.
SQLITE_OPTIONS = -DNDEBUG=1 \
                 -DSQLITE_THREADSAFE=0 \
                 -DSQLITE_DQS=0 \
                 -DSQLITE_DEFAULT_MEMSTATUS=0 \
                 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 -DSQLITE_OMIT_DECLTYPE \
                 -DSQLITE_OMIT_DEPRECATED \
                 -DSQLITE_OMIT_GET_TABLE \
                 -DSQLITE_OMIT_PROGRESS_CALLBACK \
................................................................................
                 -DSQLITE_HAVE_ZLIB \
                 -DSQLITE_INTROSPECTION_PRAGMAS \
                 -DSQLITE_ENABLE_DBPAGE_VTAB

# Setup the options used to compile the included SQLite shell.
SHELL_OPTIONS = -DNDEBUG=1 \
                -DSQLITE_THREADSAFE=0 \
                -DSQLITE_DQS=0 \
                -DSQLITE_DEFAULT_MEMSTATUS=0 \
                -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                -DSQLITE_OMIT_DECLTYPE \
                -DSQLITE_OMIT_DEPRECATED \
                -DSQLITE_OMIT_GET_TABLE \
                -DSQLITE_OMIT_PROGRESS_CALLBACK \

}

# Options used to compile the included SQLite library.
#
set SQLITE_OPTIONS {
  -DNDEBUG=1
  -DSQLITE_THREADSAFE=0

  -DSQLITE_DEFAULT_MEMSTATUS=0
  -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1
  -DSQLITE_LIKE_DOESNT_MATCH_BLOBS
  -DSQLITE_OMIT_DECLTYPE
  -DSQLITE_OMIT_DEPRECATED
  -DSQLITE_OMIT_GET_TABLE
  -DSQLITE_OMIT_PROGRESS_CALLBACK

}

# Options used to compile the included SQLite library.
#
set SQLITE_OPTIONS {
  -DNDEBUG=1
  -DSQLITE_THREADSAFE=0
  -DSQLITE_DQS=0
  -DSQLITE_DEFAULT_MEMSTATUS=0
  -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1
  -DSQLITE_LIKE_DOESNT_MATCH_BLOBS
  -DSQLITE_OMIT_DECLTYPE
  -DSQLITE_OMIT_DEPRECATED
  -DSQLITE_OMIT_GET_TABLE
  -DSQLITE_OMIT_PROGRESS_CALLBACK

  }else

  if( c=='d' && n>=3 && strncmp(azArg[0], "dbconfig", n)==0 ){
    static const struct DbConfigChoices {
      const char *zName;
      int op;
    } aDbConfig[] = {
        { "enable_fkey",      SQLITE_DBCONFIG_ENABLE_FKEY            },
        { "enable_trigger",   SQLITE_DBCONFIG_ENABLE_TRIGGER         },
        { "fts3_tokenizer",   SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER  },
        { "load_extension",   SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION  },
        { "no_ckpt_on_close", SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE       },
        { "enable_qpsg",      SQLITE_DBCONFIG_ENABLE_QPSG            },
        { "trigger_eqp",      SQLITE_DBCONFIG_TRIGGER_EQP            },
        { "reset_database",   SQLITE_DBCONFIG_RESET_DATABASE         },
        { "defensive",        SQLITE_DBCONFIG_DEFENSIVE              },




    };
    int ii, v;
    open_db(p, 0);
    for(ii=0; ii<ArraySize(aDbConfig); ii++){
      if( nArg>1 && strcmp(azArg[1], aDbConfig[ii].zName)!=0 ) continue;
      if( nArg>=3 ){
        sqlite3_db_config(p->db, aDbConfig[ii].op, booleanValue(azArg[2]), 0);

  }else

  if( c=='d' && n>=3 && strncmp(azArg[0], "dbconfig", n)==0 ){
    static const struct DbConfigChoices {
      const char *zName;
      int op;
    } aDbConfig[] = {
        { "enable_fkey",        SQLITE_DBCONFIG_ENABLE_FKEY           },
        { "enable_trigger",     SQLITE_DBCONFIG_ENABLE_TRIGGER        },
        { "fts3_tokenizer",     SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER },
        { "load_extension",     SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION },
        { "no_ckpt_on_close",   SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      },
        { "enable_qpsg",        SQLITE_DBCONFIG_ENABLE_QPSG           },
        { "trigger_eqp",        SQLITE_DBCONFIG_TRIGGER_EQP           },
        { "reset_database",     SQLITE_DBCONFIG_RESET_DATABASE        },
        { "defensive",          SQLITE_DBCONFIG_DEFENSIVE             },
        { "writable_schema",    SQLITE_DBCONFIG_WRITABLE_SCHEMA       },
        { "legacy_alter_table", SQLITE_DBCONFIG_LEGACY_ALTER_TABLE    },
        { "dqs_dml",            SQLITE_DBCONFIG_DQS_DML               },
        { "dqs_ddl",            SQLITE_DBCONFIG_DQS_DDL               },
    };
    int ii, v;
    open_db(p, 0);
    for(ii=0; ii<ArraySize(aDbConfig); ii++){
      if( nArg>1 && strcmp(azArg[1], aDbConfig[ii].zName)!=0 ) continue;
      if( nArg>=3 ){
        sqlite3_db_config(p->db, aDbConfig[ii].op, booleanValue(azArg[2]), 0);

**
*************************************************************************
**
** This file implements routines used to report what compile-time options
** SQLite was built with.
*/

#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS

/*
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
*/
#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H)
#include "config.h"
................................................................................
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.29.0"
#define SQLITE_VERSION_NUMBER 3029000
#define SQLITE_SOURCE_ID      "2019-06-13 14:07:41 f8696b60eec0dcacfe92d9a31cbf1436d674140e5447de0cd1c2f52bff6c2be4"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
** to setting [PRAGMA writable_schema=ON] or [PRAGMA writable_schema=OFF].
** The first argument to this setting is an integer which is 0 to disable 
** the writable_schema, positive to enable writable_schema, or negative to
** leave the setting unchanged. The second parameter is a pointer to an
** integer into which is written 0 or 1 to indicate whether the writable_schema
** is enabled or disabled following this call.
** </dd>




























** </dl>
*/
#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
................................................................................
#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_QPSG           1007 /* int int* */
#define SQLITE_DBCONFIG_TRIGGER_EQP           1008 /* int int* */
#define SQLITE_DBCONFIG_RESET_DATABASE        1009 /* int int* */
#define SQLITE_DBCONFIG_DEFENSIVE             1010 /* int int* */
#define SQLITE_DBCONFIG_WRITABLE_SCHEMA       1011 /* int int* */



#define SQLITE_DBCONFIG_MAX                   1011 /* Largest DBCONFIG */

/*
** CAPI3REF: Enable Or Disable Extended Result Codes
** METHOD: sqlite3
**
** ^The sqlite3_extended_result_codes() routine enables or disables the
** [extended result codes] feature of SQLite. ^The extended result
................................................................................
#define SQLITE_Fts3Tokenizer  0x00400000  /* Enable fts3_tokenizer(2) */
#define SQLITE_EnableQPSG     0x00800000  /* Query Planner Stability Guarantee*/
#define SQLITE_TriggerEQP     0x01000000  /* Show trigger EXPLAIN QUERY PLAN */
#define SQLITE_ResetDatabase  0x02000000  /* Reset the database */
#define SQLITE_LegacyAlter    0x04000000  /* Legacy ALTER TABLE behaviour */
#define SQLITE_NoSchemaError  0x08000000  /* Do not report schema parse errors*/
#define SQLITE_Defensive      0x10000000  /* Input SQL is likely hostile */



/* Flags used only if debugging */
#define HI(X)  ((u64)(X)<<32)
#ifdef SQLITE_DEBUG
#define SQLITE_SqlTrace       HI(0x0001)  /* Debug print SQL as it executes */
#define SQLITE_VdbeListing    HI(0x0002)  /* Debug listings of VDBE progs */
#define SQLITE_VdbeTrace      HI(0x0004)  /* True to trace VDBE execution */
................................................................................
#define NC_UEList    0x0080  /* True if uNC.pEList is used */
#define NC_UAggInfo  0x0100  /* True if uNC.pAggInfo is used */
#define NC_UUpsert   0x0200  /* True if uNC.pUpsert is used */
#define NC_MinMaxAgg 0x1000  /* min/max aggregates seen.  See note above */
#define NC_Complex   0x2000  /* True if a function or subquery seen */
#define NC_AllowWin  0x4000  /* Window functions are allowed here */
#define NC_HasWin    0x8000  /* One or more window functions seen */
#define NC_NoDblQStr 0x10000 /* Do not allow double-quoted string hack.
                             ** Mnemonic: "NO DouBLe-Quoted STRings" */

/*
** An instance of the following object describes a single ON CONFLICT
** clause in an upsert.
**
** The pUpsertTarget field is only set if the ON CONFLICT clause includes
** conflict-target clause.  (In "ON CONFLICT(a,b)" the "(a,b)" is the
................................................................................
# endif
#endif

/* EVIDENCE-OF: R-38720-18127 The default setting is determined by the
** SQLITE_ALLOW_COVERING_INDEX_SCAN compile-time option, or is "on" if
** that compile-time option is omitted.
*/
#ifndef SQLITE_ALLOW_COVERING_INDEX_SCAN
# define SQLITE_ALLOW_COVERING_INDEX_SCAN 1







#endif

/* The minimum PMA size is set to this value multiplied by the database
** page size in bytes.
*/
#ifndef SQLITE_SORTER_PMASZ
# define SQLITE_SORTER_PMASZ 250
................................................................................
  if( pCache ){
    if( pcache1.separateCache ){
      pGroup = (PGroup*)&pCache[1];
      pGroup->mxPinned = 10;
    }else{
      pGroup = &pcache1.grp;
    }

    if( pGroup->lru.isAnchor==0 ){
      pGroup->lru.isAnchor = 1;
      pGroup->lru.pLruPrev = pGroup->lru.pLruNext = &pGroup->lru;
    }
    pCache->pGroup = pGroup;
    pCache->szPage = szPage;
    pCache->szExtra = szExtra;
    pCache->szAlloc = szPage + szExtra + ROUND8(sizeof(PgHdr1));
    pCache->bPurgeable = (bPurgeable ? 1 : 0);
    pcache1EnterMutex(pGroup);
    pcache1ResizeHash(pCache);
    if( bPurgeable ){
      pCache->nMin = 10;
      pGroup->nMinPage += pCache->nMin;
      pGroup->mxPinned = pGroup->nMaxPage + 10 - pGroup->nMinPage;
      pCache->pnPurgeable = &pGroup->nPurgeable;
    }else{
................................................................................
  assert( pOp->p1>=0 );
  assert( pOp->p2>=0 );
  pCx = p->apCsr[pOp->p1];
  if( pCx ){
    /* If the ephermeral table is already open, erase all existing content
    ** so that the table is empty again, rather than creating a new table. */
    assert( pCx->isEphemeral );


    if( pCx->pBtx ){
      rc = sqlite3BtreeClearTable(pCx->pBtx, pCx->pgnoRoot, 0);
    }
  }else{
    pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, CURTYPE_BTREE);
    if( pCx==0 ) goto no_mem;
    pCx->nullRow = 1;
    pCx->isEphemeral = 1;
    rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBtx, 
                          BTREE_OMIT_JOURNAL | BTREE_SINGLE | pOp->p5,
                          vfsFlags);
    if( rc==SQLITE_OK ){
      rc = sqlite3BtreeBeginTrans(pCx->pBtx, 1, 0);
    }
................................................................................
                                0, pCx->uc.pCursor);
        pCx->isTable = 1;
      }
    }
    pCx->isOrdered = (pOp->p5!=BTREE_UNORDERED);
  }
  if( rc ) goto abort_due_to_error;

  break;
}

/* Opcode: SorterOpen P1 P2 P3 P4 *
**
** This opcode works like OP_OpenEphemeral except that it opens
** a transient index that is specifically designed to sort large
................................................................................
  }
  zSpan += n+1;
  if( zCol && sqlite3StrICmp(zSpan, zCol)!=0 ){
    return 0;
  }
  return 1;
}


















/*
** Given the name of a column of the form X.Y.Z or Y.Z or just Z, look up
** that name in the set of source tables in pSrcList and make the pExpr 
** expression node refer back to that source column.  The following changes
** are made to pExpr:
**
................................................................................
  ** pExpr.
  **
  ** Because no reference was made to outer contexts, the pNC->nRef
  ** fields are not changed in any context.
  */
  if( cnt==0 && zTab==0 ){
    assert( pExpr->op==TK_ID );
    if( ExprHasProperty(pExpr,EP_DblQuoted) 
     && 0==(pTopNC->ncFlags&NC_NoDblQStr) 
    ){
      /* If a double-quoted identifier does not match any known column name,
      ** then treat it as a string.
      **
      ** This hack was added in the early days of SQLite in a misguided attempt
      ** to be compatible with MySQL 3.x, which used double-quotes for strings.
      ** I now sorely regret putting in this hack. The effect of this hack is
................................................................................
    sSrc.nSrc = 1;
    sSrc.a[0].zName = pTab->zName;
    sSrc.a[0].pTab = pTab;
    sSrc.a[0].iCursor = -1;
  }
  sNC.pParse = pParse;
  sNC.pSrcList = &sSrc;
  sNC.ncFlags = type;
  if( !pParse->db->init.busy && !sqlite3WritableSchema(pParse->db) ){
    sNC.ncFlags |= NC_NoDblQStr;
  }
  if( (rc = sqlite3ResolveExprNames(&sNC, pExpr))!=SQLITE_OK ) return rc;
  if( pList ) rc = sqlite3ResolveExprListNames(&sNC, pList);
  return rc;
}

/************** End of resolve.c *********************************************/
/************** Begin file expr.c ********************************************/
................................................................................
}

/*
** Convert a scalar expression node to a TK_REGISTER referencing
** register iReg.  The caller must ensure that iReg already contains
** the correct value for the expression.
*/
static void exprToRegister(Expr *p, int iReg){

  p->op2 = p->op;
  p->op = TK_REGISTER;
  p->iTable = iReg;
  ExprClearProperty(p, EP_Skip);
}

/*
................................................................................
  return WRC_Continue;
}

/*
** Walker callback used by sqlite3RenameExprUnmap().
*/
static int renameUnmapSelectCb(Walker *pWalker, Select *p){
  if( ALWAYS(p->pSrc) ){  /* Every Select as a SrcList, even if it is empty */
    Parse *pParse = pWalker->pParse;
    int i;










    for(i=0; i<p->pSrc->nSrc; i++){
      sqlite3RenameTokenRemap(pParse, 0, (void*)p->pSrc->a[0].zName);
    }
  }
  return WRC_Continue;
}

/*
** Remove all nodes that are part of expression pExpr from the rename list.
................................................................................
** used by the Table object.
*/
static void SQLITE_NOINLINE deleteTable(sqlite3 *db, Table *pTable){
  Index *pIndex, *pNext;

#ifdef SQLITE_DEBUG
  /* Record the number of outstanding lookaside allocations in schema Tables
  ** prior to doing any free() operations.  Since schema Tables do not use
  ** lookaside, this number should not change. */




  int nLookaside = 0;
  if( db && (pTable->tabFlags & TF_Ephemeral)==0 ){
    nLookaside = sqlite3LookasideUsed(db, 0);
  }
#endif

  /* Delete all indices associated with this table. */
  for(pIndex = pTable->pIndex; pIndex; pIndex=pNext){
    pNext = pIndex->pNext;
................................................................................
  db->flags = savedFlags;
  if( pParse->nErr ) return 0;
  while( pSelect->pPrior ) pSelect = pSelect->pPrior;
  pTab = sqlite3DbMallocZero(db, sizeof(Table) );
  if( pTab==0 ){
    return 0;
  }
  /* The sqlite3ResultSetOfSelect() is only used n contexts where lookaside
  ** is disabled */
  assert( db->lookaside.bDisable );
  pTab->nTabRef = 1;
  pTab->zName = 0;
  pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
  sqlite3ColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol);
  sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSelect);
  pTab->iPKey = -1;
  if( db->mallocFailed ){
................................................................................
        for(iFrom=iTo=0; iFrom<cnt; iFrom++){
          if( zNew[iFrom]==wc[3] ) iFrom++;
          zNew[iTo++] = zNew[iFrom];
        }
        zNew[iTo] = 0;
        assert( iTo>0 );

        /* If the RHS begins with a digit, a +/- sign or whitespace, then the
        ** LHS must be an ordinary column (not a virtual table column) with
        ** TEXT affinity. Otherwise the LHS might be numeric and "lhs >= rhs"
        ** would be false even though "lhs LIKE rhs" is true.  But if the RHS
        ** does not start with a digit or +/-, then "lhs LIKE rhs" will always
        ** be false if the LHS is numeric and so the optimization still works.
        **


        ** 2018-09-10 ticket c94369cae9b561b1f996d0054bfab11389f9d033
        ** The RHS pattern must not be '/%' because the termination condition
        ** will then become "x<'0'" and if the affinity is numeric, will then
        ** be converted into "x<0", which is incorrect.
        */
        if( sqlite3Isdigit(zNew[0])
         || sqlite3Isspace(zNew[0])
         || zNew[0]=='-'
         || zNew[0]=='+'
         || zNew[iTo-1]=='0'-1
        ){
          if( pLeft->op!=TK_COLUMN 
           || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT 
           || IsVirtual(pLeft->y.pTab)  /* Value might be numeric */
          ){









            sqlite3ExprDelete(db, pPrefix);
            sqlite3ValueFree(pVal);
            return 0;
          }
        }
      }
      *ppPrefix = pPrefix;
................................................................................
/*
** Convert OP_Column opcodes to OP_Copy in previously generated code.
**
** This routine runs over generated VDBE code and translates OP_Column
** opcodes into OP_Copy when the table is being accessed via co-routine 
** instead of via table lookup.
**
** If the bIncrRowid parameter is 0, then any OP_Rowid instructions on
** cursor iTabCur are transformed into OP_Null. Or, if bIncrRowid is non-zero,
** then each OP_Rowid is transformed into an instruction to increment the
** value stored in its output register.
*/
static void translateColumnToCopy(
  Parse *pParse,      /* Parsing context */
  int iStart,         /* Translate from this opcode to the end */
  int iTabCur,        /* OP_Column/OP_Rowid references to this table */
  int iRegister,      /* The first column is in this register */
  int bIncrRowid      /* If non-zero, transform OP_rowid to OP_AddImm(1) */
){
  Vdbe *v = pParse->pVdbe;
  VdbeOp *pOp = sqlite3VdbeGetOp(v, iStart);
  int iEnd = sqlite3VdbeCurrentAddr(v);
  if( pParse->db->mallocFailed ) return;
  for(; iStart<iEnd; iStart++, pOp++){
    if( pOp->p1!=iTabCur ) continue;
    if( pOp->opcode==OP_Column ){
      pOp->opcode = OP_Copy;
      pOp->p1 = pOp->p2 + iRegister;
      pOp->p2 = pOp->p3;
      pOp->p3 = 0;
    }else if( pOp->opcode==OP_Rowid ){
      if( bIncrRowid ){
        /* Increment the value stored in the P2 operand of the OP_Rowid. */
        pOp->opcode = OP_AddImm;
        pOp->p1 = pOp->p2;
        pOp->p2 = 1;
      }else{
        pOp->opcode = OP_Null;
        pOp->p1 = 0;
        pOp->p3 = 0;
      }
    }
  }
................................................................................
  );
  sqlite3VdbeAddOp2(v, OP_IdxInsert, pLevel->iIdxCur, regRecord);
  sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
  if( pPartial ) sqlite3VdbeResolveLabel(v, iContinue);
  if( pTabItem->fg.viaCoroutine ){
    sqlite3VdbeChangeP2(v, addrCounter, regBase+n);
    testcase( pParse->db->mallocFailed );

    translateColumnToCopy(pParse, addrTop, pLevel->iTabCur,
                          pTabItem->regResult, 1);
    sqlite3VdbeGoto(v, addrTop);
    pTabItem->fg.viaCoroutine = 0;
  }else{
    sqlite3VdbeAddOp2(v, OP_Next, pLevel->iTabCur, addrTop+1); VdbeCoverage(v);
  }
  sqlite3VdbeChangeP5(v, SQLITE_STMTSTATUS_AUTOINDEX);
  sqlite3VdbeJumpHere(v, addrTop);
................................................................................
** selectWindowRewriteExprCb() by selectWindowRewriteEList().
*/
typedef struct WindowRewrite WindowRewrite;
struct WindowRewrite {
  Window *pWin;
  SrcList *pSrc;
  ExprList *pSub;

  Select *pSubSelect;             /* Current sub-select, if any */
};

/*
** Callback function used by selectWindowRewriteEList(). If necessary,
** this function appends to the output expression-list and updates 
** expression (*ppExpr) in place.
................................................................................
        sqlite3ExprDelete(pParse->db, pExpr);
        ExprClearProperty(pExpr, EP_Static);
        memset(pExpr, 0, sizeof(Expr));

        pExpr->op = TK_COLUMN;
        pExpr->iColumn = p->pSub->nExpr-1;
        pExpr->iTable = p->pWin->iEphCsr;

      }

      break;
    }

    default: /* no-op */
      break;
................................................................................
** appending the new one.
*/
static void selectWindowRewriteEList(
  Parse *pParse, 
  Window *pWin,
  SrcList *pSrc,
  ExprList *pEList,               /* Rewrite expressions in this list */

  ExprList **ppSub                /* IN/OUT: Sub-select expression-list */
){
  Walker sWalker;
  WindowRewrite sRewrite;

  memset(&sWalker, 0, sizeof(Walker));
  memset(&sRewrite, 0, sizeof(WindowRewrite));

  sRewrite.pSub = *ppSub;
  sRewrite.pWin = pWin;
  sRewrite.pSrc = pSrc;


  sWalker.pParse = pParse;
  sWalker.xExprCallback = selectWindowRewriteExprCb;
  sWalker.xSelectCallback = selectWindowRewriteSelectCb;
  sWalker.u.pRewrite = &sRewrite;

  (void)sqlite3WalkExprList(&sWalker, pEList);
................................................................................
    ExprList *pGroupBy = p->pGroupBy;
    Expr *pHaving = p->pHaving;
    ExprList *pSort = 0;

    ExprList *pSublist = 0;       /* Expression list for sub-query */
    Window *pMWin = p->pWin;      /* Master window object */
    Window *pWin;                 /* Window object iterator */







    p->pSrc = 0;
    p->pWhere = 0;
    p->pGroupBy = 0;
    p->pHaving = 0;


    /* Create the ORDER BY clause for the sub-select. This is the concatenation
    ** of the window PARTITION and ORDER BY clauses. Then, if this makes it
    ** redundant, remove the ORDER BY from the parent SELECT.  */
    pSort = sqlite3ExprListDup(db, pMWin->pPartition, 0);
    pSort = exprListAppendList(pParse, pSort, pMWin->pOrderBy, 1);
    if( pSort && p->pOrderBy ){
................................................................................

    /* Assign a cursor number for the ephemeral table used to buffer rows.
    ** The OpenEphemeral instruction is coded later, after it is known how
    ** many columns the table will have.  */
    pMWin->iEphCsr = pParse->nTab++;
    pParse->nTab += 3;

    selectWindowRewriteEList(pParse, pMWin, pSrc, p->pEList, &pSublist);
    selectWindowRewriteEList(pParse, pMWin, pSrc, p->pOrderBy, &pSublist);
    pMWin->nBufferCol = (pSublist ? pSublist->nExpr : 0);

    /* Append the PARTITION BY and ORDER BY expressions to the to the 
    ** sub-select expression list. They are required to figure out where 
    ** boundaries for partitions and sets of peer rows lie.  */
    pSublist = exprListAppendList(pParse, pSublist, pMWin->pPartition, 0);
    pSublist = exprListAppendList(pParse, pSublist, pMWin->pOrderBy, 0);
................................................................................
    }

    pSub = sqlite3SelectNew(
        pParse, pSublist, pSrc, pWhere, pGroupBy, pHaving, pSort, 0, 0
    );
    p->pSrc = sqlite3SrcListAppend(pParse, 0, 0, 0);
    if( p->pSrc ){

      p->pSrc->a[0].pSelect = pSub;
      sqlite3SrcListAssignCursors(pParse, p->pSrc);
      if( sqlite3ExpandSubquery(pParse, &p->pSrc->a[0]) ){



        rc = SQLITE_NOMEM;
      }else{
        pSub->selFlags |= SF_Expanded;
        p->selFlags &= ~SF_Aggregate;
        sqlite3SelectPrep(pParse, pSub, 0);




      }

      sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pMWin->iEphCsr, pSublist->nExpr);
      sqlite3VdbeAddOp2(v, OP_OpenDup, pMWin->iEphCsr+1, pMWin->iEphCsr);
      sqlite3VdbeAddOp2(v, OP_OpenDup, pMWin->iEphCsr+2, pMWin->iEphCsr);
      sqlite3VdbeAddOp2(v, OP_OpenDup, pMWin->iEphCsr+3, pMWin->iEphCsr);
    }else{
      sqlite3SelectDelete(db, pSub);
    }
    if( db->mallocFailed ) rc = SQLITE_NOMEM;

  }

  return rc;
}

/*
** Free the Window object passed as the second argument.
................................................................................
        { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE,      SQLITE_NoCkptOnClose  },
        { SQLITE_DBCONFIG_ENABLE_QPSG,           SQLITE_EnableQPSG     },
        { SQLITE_DBCONFIG_TRIGGER_EQP,           SQLITE_TriggerEQP     },
        { SQLITE_DBCONFIG_RESET_DATABASE,        SQLITE_ResetDatabase  },
        { SQLITE_DBCONFIG_DEFENSIVE,             SQLITE_Defensive      },
        { SQLITE_DBCONFIG_WRITABLE_SCHEMA,       SQLITE_WriteSchema|
                                                 SQLITE_NoSchemaError  },



      };
      unsigned int i;
      rc = SQLITE_ERROR; /* IMP: R-42790-23372 */
      for(i=0; i<ArraySize(aFlagOp); i++){
        if( aFlagOp[i].op==op ){
          int onoff = va_arg(ap, int);
          int *pRes = va_arg(ap, int*);
................................................................................
      break;
    }
  }
  va_end(ap);
  return rc;
}


/*
** Return true if the buffer z[0..n-1] contains all spaces.
*/
static int allSpaces(const char *z, int n){
  while( n>0 && z[n-1]==' ' ){ n--; }
  return n==0;
}

/*
** This is the default collating function named "BINARY" which is always
** available.
**
** If the padFlag argument is not NULL then space padding at the end
** of strings is ignored.  This implements the RTRIM collation.
*/
static int binCollFunc(
  void *padFlag,
  int nKey1, const void *pKey1,
  int nKey2, const void *pKey2
){
  int rc, n;

  n = nKey1<nKey2 ? nKey1 : nKey2;
  /* EVIDENCE-OF: R-65033-28449 The built-in BINARY collation compares
  ** strings byte by byte using the memcmp() function from the standard C
  ** library. */
  assert( pKey1 && pKey2 );
  rc = memcmp(pKey1, pKey2, n);
  if( rc==0 ){
    if( padFlag
     && allSpaces(((char*)pKey1)+n, nKey1-n)
     && allSpaces(((char*)pKey2)+n, nKey2-n)
    ){
      /* EVIDENCE-OF: R-31624-24737 RTRIM is like BINARY except that extra
      ** spaces at the end of either string do not change the result. In other
      ** words, strings will compare equal to one another as long as they
      ** differ only in the number of spaces at the end.
      */
    }else{
      rc = nKey1 - nKey2;
    }
  }
  return rc;
}

















/*
** Return true if CollSeq is the default built-in BINARY.
*/
SQLITE_PRIVATE int sqlite3IsBinary(const CollSeq *p){
  assert( p==0 || p->xCmp!=binCollFunc || p->pUser!=0
            || strcmp(p->zName,"BINARY")==0 );
  return p==0 || (p->xCmp==binCollFunc && p->pUser==0);
}

/*
** Another built-in collating sequence: NOCASE. 
**
** This collating sequence is intended to be used for "case independent
** comparison". SQLite's knowledge of upper and lower case equivalents
................................................................................
  memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
  db->aLimit[SQLITE_LIMIT_WORKER_THREADS] = SQLITE_DEFAULT_WORKER_THREADS;
  db->autoCommit = 1;
  db->nextAutovac = -1;
  db->szMmap = sqlite3GlobalConfig.szMmap;
  db->nextPagesize = 0;
  db->nMaxSorterMmap = 0x7FFFFFFF;
  db->flags |= SQLITE_ShortColNames | SQLITE_EnableTrigger | SQLITE_CacheSpill




























#if !defined(SQLITE_DEFAULT_AUTOMATIC_INDEX) || SQLITE_DEFAULT_AUTOMATIC_INDEX
                 | SQLITE_AutoIndex
#endif
#if SQLITE_DEFAULT_CKPTFULLFSYNC
                 | SQLITE_CkptFullFSync
#endif
#if SQLITE_DEFAULT_FILE_FORMAT<4
................................................................................
  ** EVIDENCE-OF: R-52786-44878 SQLite defines three built-in collating
  ** functions:
  */
  createCollation(db, sqlite3StrBINARY, SQLITE_UTF8, 0, binCollFunc, 0);
  createCollation(db, sqlite3StrBINARY, SQLITE_UTF16BE, 0, binCollFunc, 0);
  createCollation(db, sqlite3StrBINARY, SQLITE_UTF16LE, 0, binCollFunc, 0);
  createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0);
  createCollation(db, "RTRIM", SQLITE_UTF8, (void*)1, binCollFunc, 0);
  if( db->mallocFailed ){
    goto opendb_out;
  }
  /* EVIDENCE-OF: R-08308-17224 The default collating function for all
  ** strings is BINARY. 
  */
  db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, sqlite3StrBINARY, 0);
................................................................................

      for(i=nHeight+1; i<FTS_MAX_APPENDABLE_HEIGHT; i++){
        pWriter->aNodeWriter[i].iBlock = pWriter->iStart + i*pWriter->nLeafEst;
      }

      pNode = &pWriter->aNodeWriter[nHeight];
      pNode->iBlock = pWriter->iStart + pWriter->nLeafEst*nHeight;
      blobGrowBuffer(&pNode->block, MAX(nRoot, p->nNodeSize), &rc);


      if( rc==SQLITE_OK ){
        memcpy(pNode->block.a, aRoot, nRoot);
        pNode->block.n = nRoot;

      }

      for(i=nHeight; i>=0 && rc==SQLITE_OK; i--){
        NodeReader reader;
        pNode = &pWriter->aNodeWriter[i];

        rc = nodeReaderInit(&reader, pNode->block.a, pNode->block.n);
................................................................................
            pNode->key.n = reader.term.n;
            if( i>0 ){
              char *aBlock = 0;
              int nBlock = 0;
              pNode = &pWriter->aNodeWriter[i-1];
              pNode->iBlock = reader.iChild;
              rc = sqlite3Fts3ReadBlock(p, reader.iChild, &aBlock, &nBlock, 0);
              blobGrowBuffer(&pNode->block, MAX(nBlock, p->nNodeSize), &rc);


              if( rc==SQLITE_OK ){
                memcpy(pNode->block.a, aBlock, nBlock);
                pNode->block.n = nBlock;

              }
              sqlite3_free(aBlock);
            }
          }
        }
        nodeReaderRelease(&reader);
      }
................................................................................
      pRoot = &pParse->aNode[iRoot];
      j = 1;
    }
    if( pApnd ){
      u32 iStart, iLabel;
      JsonNode *pNode;
      iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0);
      iLabel = jsonParseAddNode(pParse, JSON_STRING, i, zPath);
      zPath += i;
      pNode = jsonLookupAppend(pParse, zPath, pApnd, pzErr);
      if( pParse->oom ) return 0;
      if( pNode ){
        pRoot = &pParse->aNode[iRoot];
        pRoot->u.iAppend = iStart - iRoot;
        pRoot->jnFlags |= JNODE_APPEND;
................................................................................
static void fts5SourceIdFunc(
  sqlite3_context *pCtx,          /* Function call context */
  int nArg,                       /* Number of args */
  sqlite3_value **apUnused        /* Function arguments */
){
  assert( nArg==0 );
  UNUSED_PARAM2(nArg, apUnused);
  sqlite3_result_text(pCtx, "fts5: 2019-06-13 14:07:41 f8696b60eec0dcacfe92d9a31cbf1436d674140e5447de0cd1c2f52bff6c2be4", -1, SQLITE_TRANSIENT);
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts5ShadowName(const char *zName){
................................................................................
#endif
  return rc;
}
#endif /* SQLITE_CORE */
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */

/************** End of stmt.c ************************************************/
#if __LINE__!=223662
#undef SQLITE_SOURCE_ID
#define SQLITE_SOURCE_ID      "2019-06-13 14:07:41 f8696b60eec0dcacfe92d9a31cbf1436d674140e5447de0cd1c2f52bff6calt2"
#endif
/* Return the source-id for this library */
SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
/************************** End of sqlite3.c ******************************/

**
*************************************************************************
**
** This file implements routines used to report what compile-time options
** SQLite was built with.
*/

#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS /* IMP: R-16824-07538 */

/*
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
*/
#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H)
#include "config.h"
................................................................................
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.29.0"
#define SQLITE_VERSION_NUMBER 3029000
#define SQLITE_SOURCE_ID      "2019-07-08 13:45:02 8fb0c6d5a38e77aa4c5f394fb8af1b0c7c6a4790e932aabc213a3078ee9acaf6"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
** to setting [PRAGMA writable_schema=ON] or [PRAGMA writable_schema=OFF].
** The first argument to this setting is an integer which is 0 to disable 
** the writable_schema, positive to enable writable_schema, or negative to
** leave the setting unchanged. The second parameter is a pointer to an
** integer into which is written 0 or 1 to indicate whether the writable_schema
** is enabled or disabled following this call.
** </dd>
**
** [[SQLITE_DBCONFIG_LEGACY_ALTER_TABLE]]
** <dt>SQLITE_DBCONFIG_LEGACY_ALTER_TABLE</dt>
** <dd>The SQLITE_DBCONFIG_LEGACY_ALTER_TABLE option activates or deactivates
** the legacy behavior of the [ALTER TABLE RENAME] command such it
** behaves as it did prior to [version 3.24.0] (2018-06-04).  See the
** "Compatibility Notice" on the [ALTER TABLE RENAME documentation] for
** additional information. This feature can also be turned on and off
** using the [PRAGMA legacy_alter_table] statement.
** </dd>
**
** [[SQLITE_DBCONFIG_DQS_DML]]
** <dt>SQLITE_DBCONFIG_DQS_DML</td>
** <dd>The SQLITE_DBCONFIG_DQS_DML option activates or deactivates
** the legacy [double-quoted string literal] misfeature for DML statement
** only, that is DELETE, INSERT, SELECT, and UPDATE statements. The
** default value of this setting is determined by the [-DSQLITE_DQS]
** compile-time option.
** </dd>
**
** [[SQLITE_DBCONFIG_DQS_DDL]]
** <dt>SQLITE_DBCONFIG_DQS_DDL</td>
** <dd>The SQLITE_DBCONFIG_DQS option activates or deactivates
** the legacy [double-quoted string literal] misfeature for DDL statements,
** such as CREATE TABLE and CREATE INDEX. The
** default value of this setting is determined by the [-DSQLITE_DQS]
** compile-time option.
** </dd>
** </dl>
*/
#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
................................................................................
#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_QPSG           1007 /* int int* */
#define SQLITE_DBCONFIG_TRIGGER_EQP           1008 /* int int* */
#define SQLITE_DBCONFIG_RESET_DATABASE        1009 /* int int* */
#define SQLITE_DBCONFIG_DEFENSIVE             1010 /* int int* */
#define SQLITE_DBCONFIG_WRITABLE_SCHEMA       1011 /* int int* */
#define SQLITE_DBCONFIG_LEGACY_ALTER_TABLE    1012 /* int int* */
#define SQLITE_DBCONFIG_DQS_DML               1013 /* int int* */
#define SQLITE_DBCONFIG_DQS_DDL               1014 /* int int* */
#define SQLITE_DBCONFIG_MAX                   1014 /* Largest DBCONFIG */

/*
** CAPI3REF: Enable Or Disable Extended Result Codes
** METHOD: sqlite3
**
** ^The sqlite3_extended_result_codes() routine enables or disables the
** [extended result codes] feature of SQLite. ^The extended result
................................................................................
#define SQLITE_Fts3Tokenizer  0x00400000  /* Enable fts3_tokenizer(2) */
#define SQLITE_EnableQPSG     0x00800000  /* Query Planner Stability Guarantee*/
#define SQLITE_TriggerEQP     0x01000000  /* Show trigger EXPLAIN QUERY PLAN */
#define SQLITE_ResetDatabase  0x02000000  /* Reset the database */
#define SQLITE_LegacyAlter    0x04000000  /* Legacy ALTER TABLE behaviour */
#define SQLITE_NoSchemaError  0x08000000  /* Do not report schema parse errors*/
#define SQLITE_Defensive      0x10000000  /* Input SQL is likely hostile */
#define SQLITE_DqsDDL         0x20000000  /* dbl-quoted strings allowed in DDL*/
#define SQLITE_DqsDML         0x40000000  /* dbl-quoted strings allowed in DML*/

/* Flags used only if debugging */
#define HI(X)  ((u64)(X)<<32)
#ifdef SQLITE_DEBUG
#define SQLITE_SqlTrace       HI(0x0001)  /* Debug print SQL as it executes */
#define SQLITE_VdbeListing    HI(0x0002)  /* Debug listings of VDBE progs */
#define SQLITE_VdbeTrace      HI(0x0004)  /* True to trace VDBE execution */
................................................................................
#define NC_UEList    0x0080  /* True if uNC.pEList is used */
#define NC_UAggInfo  0x0100  /* True if uNC.pAggInfo is used */
#define NC_UUpsert   0x0200  /* True if uNC.pUpsert is used */
#define NC_MinMaxAgg 0x1000  /* min/max aggregates seen.  See note above */
#define NC_Complex   0x2000  /* True if a function or subquery seen */
#define NC_AllowWin  0x4000  /* Window functions are allowed here */
#define NC_HasWin    0x8000  /* One or more window functions seen */
#define NC_IsDDL    0x10000  /* Resolving names in a CREATE statement */


/*
** An instance of the following object describes a single ON CONFLICT
** clause in an upsert.
**
** The pUpsertTarget field is only set if the ON CONFLICT clause includes
** conflict-target clause.  (In "ON CONFLICT(a,b)" the "(a,b)" is the
................................................................................
# endif
#endif

/* EVIDENCE-OF: R-38720-18127 The default setting is determined by the
** SQLITE_ALLOW_COVERING_INDEX_SCAN compile-time option, or is "on" if
** that compile-time option is omitted.
*/
#if !defined(SQLITE_ALLOW_COVERING_INDEX_SCAN)
# define SQLITE_ALLOW_COVERING_INDEX_SCAN 1
#else
# if !SQLITE_ALLOW_COVERING_INDEX_SCAN 
#   error "Compile-time disabling of covering index scan using the\
 -DSQLITE_ALLOW_COVERING_INDEX_SCAN=0 option is deprecated.\
 Contact SQLite developers if this is a problem for you, and\
 delete this #error macro to continue with your build."
# endif
#endif

/* The minimum PMA size is set to this value multiplied by the database
** page size in bytes.
*/
#ifndef SQLITE_SORTER_PMASZ
# define SQLITE_SORTER_PMASZ 250
................................................................................
  if( pCache ){
    if( pcache1.separateCache ){
      pGroup = (PGroup*)&pCache[1];
      pGroup->mxPinned = 10;
    }else{
      pGroup = &pcache1.grp;
    }
    pcache1EnterMutex(pGroup);
    if( pGroup->lru.isAnchor==0 ){
      pGroup->lru.isAnchor = 1;
      pGroup->lru.pLruPrev = pGroup->lru.pLruNext = &pGroup->lru;
    }
    pCache->pGroup = pGroup;
    pCache->szPage = szPage;
    pCache->szExtra = szExtra;
    pCache->szAlloc = szPage + szExtra + ROUND8(sizeof(PgHdr1));
    pCache->bPurgeable = (bPurgeable ? 1 : 0);

    pcache1ResizeHash(pCache);
    if( bPurgeable ){
      pCache->nMin = 10;
      pGroup->nMinPage += pCache->nMin;
      pGroup->mxPinned = pGroup->nMaxPage + 10 - pGroup->nMinPage;
      pCache->pnPurgeable = &pGroup->nPurgeable;
    }else{
................................................................................
  assert( pOp->p1>=0 );
  assert( pOp->p2>=0 );
  pCx = p->apCsr[pOp->p1];
  if( pCx ){
    /* If the ephermeral table is already open, erase all existing content
    ** so that the table is empty again, rather than creating a new table. */
    assert( pCx->isEphemeral );
    pCx->seqCount = 0;
    pCx->cacheStatus = CACHE_STALE;
    if( pCx->pBtx ){
      rc = sqlite3BtreeClearTable(pCx->pBtx, pCx->pgnoRoot, 0);
    }
  }else{
    pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, CURTYPE_BTREE);
    if( pCx==0 ) goto no_mem;

    pCx->isEphemeral = 1;
    rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBtx, 
                          BTREE_OMIT_JOURNAL | BTREE_SINGLE | pOp->p5,
                          vfsFlags);
    if( rc==SQLITE_OK ){
      rc = sqlite3BtreeBeginTrans(pCx->pBtx, 1, 0);
    }
................................................................................
                                0, pCx->uc.pCursor);
        pCx->isTable = 1;
      }
    }
    pCx->isOrdered = (pOp->p5!=BTREE_UNORDERED);
  }
  if( rc ) goto abort_due_to_error;
  pCx->nullRow = 1;
  break;
}

/* Opcode: SorterOpen P1 P2 P3 P4 *
**
** This opcode works like OP_OpenEphemeral except that it opens
** a transient index that is specifically designed to sort large
................................................................................
  }
  zSpan += n+1;
  if( zCol && sqlite3StrICmp(zSpan, zCol)!=0 ){
    return 0;
  }
  return 1;
}

/*
** Return TRUE if the double-quoted string  mis-feature should be supported.
*/
static int areDoubleQuotedStringsEnabled(sqlite3 *db, NameContext *pTopNC){
  if( db->init.busy ) return 1;  /* Always support for legacy schemas */
  if( pTopNC->ncFlags & NC_IsDDL ){
    /* Currently parsing a DDL statement */
    if( sqlite3WritableSchema(db) && (db->flags & SQLITE_DqsDML)!=0 ){
      return 1;
    }
    return (db->flags & SQLITE_DqsDDL)!=0;
  }else{
    /* Currently parsing a DML statement */
    return (db->flags & SQLITE_DqsDML)!=0;
  }
}

/*
** Given the name of a column of the form X.Y.Z or Y.Z or just Z, look up
** that name in the set of source tables in pSrcList and make the pExpr 
** expression node refer back to that source column.  The following changes
** are made to pExpr:
**
................................................................................
  ** pExpr.
  **
  ** Because no reference was made to outer contexts, the pNC->nRef
  ** fields are not changed in any context.
  */
  if( cnt==0 && zTab==0 ){
    assert( pExpr->op==TK_ID );
    if( ExprHasProperty(pExpr,EP_DblQuoted)
     && areDoubleQuotedStringsEnabled(db, pTopNC)
    ){
      /* If a double-quoted identifier does not match any known column name,
      ** then treat it as a string.
      **
      ** This hack was added in the early days of SQLite in a misguided attempt
      ** to be compatible with MySQL 3.x, which used double-quotes for strings.
      ** I now sorely regret putting in this hack. The effect of this hack is
................................................................................
    sSrc.nSrc = 1;
    sSrc.a[0].zName = pTab->zName;
    sSrc.a[0].pTab = pTab;
    sSrc.a[0].iCursor = -1;
  }
  sNC.pParse = pParse;
  sNC.pSrcList = &sSrc;
  sNC.ncFlags = type | NC_IsDDL;



  if( (rc = sqlite3ResolveExprNames(&sNC, pExpr))!=SQLITE_OK ) return rc;
  if( pList ) rc = sqlite3ResolveExprListNames(&sNC, pList);
  return rc;
}

/************** End of resolve.c *********************************************/
/************** Begin file expr.c ********************************************/
................................................................................
}

/*
** Convert a scalar expression node to a TK_REGISTER referencing
** register iReg.  The caller must ensure that iReg already contains
** the correct value for the expression.
*/
static void exprToRegister(Expr *pExpr, int iReg){
  Expr *p = sqlite3ExprSkipCollate(pExpr);
  p->op2 = p->op;
  p->op = TK_REGISTER;
  p->iTable = iReg;
  ExprClearProperty(p, EP_Skip);
}

/*
................................................................................
  return WRC_Continue;
}

/*
** Walker callback used by sqlite3RenameExprUnmap().
*/
static int renameUnmapSelectCb(Walker *pWalker, Select *p){

  Parse *pParse = pWalker->pParse;
  int i;
  if( ALWAYS(p->pEList) ){
    ExprList *pList = p->pEList;
    for(i=0; i<pList->nExpr; i++){
      if( pList->a[i].zName ){
        sqlite3RenameTokenRemap(pParse, 0, (void*)pList->a[i].zName);
      }
    }
  }
  if( ALWAYS(p->pSrc) ){  /* Every Select as a SrcList, even if it is empty */
    SrcList *pSrc = p->pSrc;
    for(i=0; i<pSrc->nSrc; i++){
      sqlite3RenameTokenRemap(pParse, 0, (void*)pSrc->a[i].zName);
    }
  }
  return WRC_Continue;
}

/*
** Remove all nodes that are part of expression pExpr from the rename list.
................................................................................
** used by the Table object.
*/
static void SQLITE_NOINLINE deleteTable(sqlite3 *db, Table *pTable){
  Index *pIndex, *pNext;

#ifdef SQLITE_DEBUG
  /* Record the number of outstanding lookaside allocations in schema Tables
  ** prior to doing any free() operations. Since schema Tables do not use
  ** lookaside, this number should not change. 
  **
  ** If malloc has already failed, it may be that it failed while allocating
  ** a Table object that was going to be marked ephemeral. So do not check
  ** that no lookaside memory is used in this case either. */
  int nLookaside = 0;
  if( db && !db->mallocFailed && (pTable->tabFlags & TF_Ephemeral)==0 ){
    nLookaside = sqlite3LookasideUsed(db, 0);
  }
#endif

  /* Delete all indices associated with this table. */
  for(pIndex = pTable->pIndex; pIndex; pIndex=pNext){
    pNext = pIndex->pNext;
................................................................................
  db->flags = savedFlags;
  if( pParse->nErr ) return 0;
  while( pSelect->pPrior ) pSelect = pSelect->pPrior;
  pTab = sqlite3DbMallocZero(db, sizeof(Table) );
  if( pTab==0 ){
    return 0;
  }



  pTab->nTabRef = 1;
  pTab->zName = 0;
  pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
  sqlite3ColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol);
  sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSelect);
  pTab->iPKey = -1;
  if( db->mallocFailed ){
................................................................................
        for(iFrom=iTo=0; iFrom<cnt; iFrom++){
          if( zNew[iFrom]==wc[3] ) iFrom++;
          zNew[iTo++] = zNew[iFrom];
        }
        zNew[iTo] = 0;
        assert( iTo>0 );

        /* If the LHS is not an ordinary column with TEXT affinity, then the
        ** pattern prefix boundaries (both the start and end boundaries) must
        ** not look like a number.  Otherwise the pattern might be treated as
        ** a number, which will invalidate the LIKE optimization.


        **
        ** Getting this right has been a persistent source of bugs in the
        ** LIKE optimization.  See, for example:
        **    2018-09-10 https://sqlite.org/src/info/c94369cae9b561b1
        **    2019-05-02 https://sqlite.org/src/info/b043a54c3de54b28
        **    2019-06-10 https://sqlite.org/src/info/fd76310a5e843e07
        **    2019-06-14 https://sqlite.org/src/info/ce8717f0885af975
        */






        if( pLeft->op!=TK_COLUMN 
         || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT 
         || IsVirtual(pLeft->y.pTab)  /* Value might be numeric */
        ){
          int isNum;
          double rDummy;
          isNum = sqlite3AtoF(zNew, &rDummy, iTo, SQLITE_UTF8);
          if( isNum<=0 ){
            zNew[iTo-1]++;
            isNum = sqlite3AtoF(zNew, &rDummy, iTo, SQLITE_UTF8);
            zNew[iTo-1]--;
          }
          if( isNum>0 ){
            sqlite3ExprDelete(db, pPrefix);
            sqlite3ValueFree(pVal);
            return 0;
          }
        }
      }
      *ppPrefix = pPrefix;
................................................................................
/*
** Convert OP_Column opcodes to OP_Copy in previously generated code.
**
** This routine runs over generated VDBE code and translates OP_Column
** opcodes into OP_Copy when the table is being accessed via co-routine 
** instead of via table lookup.
**
** If the iAutoidxCur is not zero, then any OP_Rowid instructions on
** cursor iTabCur are transformed into OP_Sequence opcode for the
** iAutoidxCur cursor, in order to generate unique rowids for the
** automatic index being generated.
*/
static void translateColumnToCopy(
  Parse *pParse,      /* Parsing context */
  int iStart,         /* Translate from this opcode to the end */
  int iTabCur,        /* OP_Column/OP_Rowid references to this table */
  int iRegister,      /* The first column is in this register */
  int iAutoidxCur     /* If non-zero, cursor of autoindex being generated */
){
  Vdbe *v = pParse->pVdbe;
  VdbeOp *pOp = sqlite3VdbeGetOp(v, iStart);
  int iEnd = sqlite3VdbeCurrentAddr(v);
  if( pParse->db->mallocFailed ) return;
  for(; iStart<iEnd; iStart++, pOp++){
    if( pOp->p1!=iTabCur ) continue;
    if( pOp->opcode==OP_Column ){
      pOp->opcode = OP_Copy;
      pOp->p1 = pOp->p2 + iRegister;
      pOp->p2 = pOp->p3;
      pOp->p3 = 0;
    }else if( pOp->opcode==OP_Rowid ){
      if( iAutoidxCur ){

        pOp->opcode = OP_Sequence;
        pOp->p1 = iAutoidxCur;

      }else{
        pOp->opcode = OP_Null;
        pOp->p1 = 0;
        pOp->p3 = 0;
      }
    }
  }
................................................................................
  );
  sqlite3VdbeAddOp2(v, OP_IdxInsert, pLevel->iIdxCur, regRecord);
  sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
  if( pPartial ) sqlite3VdbeResolveLabel(v, iContinue);
  if( pTabItem->fg.viaCoroutine ){
    sqlite3VdbeChangeP2(v, addrCounter, regBase+n);
    testcase( pParse->db->mallocFailed );
    assert( pLevel->iIdxCur>0 );
    translateColumnToCopy(pParse, addrTop, pLevel->iTabCur,
                          pTabItem->regResult, pLevel->iIdxCur);
    sqlite3VdbeGoto(v, addrTop);
    pTabItem->fg.viaCoroutine = 0;
  }else{
    sqlite3VdbeAddOp2(v, OP_Next, pLevel->iTabCur, addrTop+1); VdbeCoverage(v);
  }
  sqlite3VdbeChangeP5(v, SQLITE_STMTSTATUS_AUTOINDEX);
  sqlite3VdbeJumpHere(v, addrTop);
................................................................................
** selectWindowRewriteExprCb() by selectWindowRewriteEList().
*/
typedef struct WindowRewrite WindowRewrite;
struct WindowRewrite {
  Window *pWin;
  SrcList *pSrc;
  ExprList *pSub;
  Table *pTab;
  Select *pSubSelect;             /* Current sub-select, if any */
};

/*
** Callback function used by selectWindowRewriteEList(). If necessary,
** this function appends to the output expression-list and updates 
** expression (*ppExpr) in place.
................................................................................
        sqlite3ExprDelete(pParse->db, pExpr);
        ExprClearProperty(pExpr, EP_Static);
        memset(pExpr, 0, sizeof(Expr));

        pExpr->op = TK_COLUMN;
        pExpr->iColumn = p->pSub->nExpr-1;
        pExpr->iTable = p->pWin->iEphCsr;
        pExpr->y.pTab = p->pTab;
      }

      break;
    }

    default: /* no-op */
      break;
................................................................................
** appending the new one.
*/
static void selectWindowRewriteEList(
  Parse *pParse, 
  Window *pWin,
  SrcList *pSrc,
  ExprList *pEList,               /* Rewrite expressions in this list */
  Table *pTab,
  ExprList **ppSub                /* IN/OUT: Sub-select expression-list */
){
  Walker sWalker;
  WindowRewrite sRewrite;

  memset(&sWalker, 0, sizeof(Walker));
  memset(&sRewrite, 0, sizeof(WindowRewrite));

  sRewrite.pSub = *ppSub;
  sRewrite.pWin = pWin;
  sRewrite.pSrc = pSrc;
  sRewrite.pTab = pTab;

  sWalker.pParse = pParse;
  sWalker.xExprCallback = selectWindowRewriteExprCb;
  sWalker.xSelectCallback = selectWindowRewriteSelectCb;
  sWalker.u.pRewrite = &sRewrite;

  (void)sqlite3WalkExprList(&sWalker, pEList);
................................................................................
    ExprList *pGroupBy = p->pGroupBy;
    Expr *pHaving = p->pHaving;
    ExprList *pSort = 0;

    ExprList *pSublist = 0;       /* Expression list for sub-query */
    Window *pMWin = p->pWin;      /* Master window object */
    Window *pWin;                 /* Window object iterator */
    Table *pTab;

    pTab = sqlite3DbMallocZero(db, sizeof(Table));
    if( pTab==0 ){
      return SQLITE_NOMEM;
    }

    p->pSrc = 0;
    p->pWhere = 0;
    p->pGroupBy = 0;
    p->pHaving = 0;
    p->selFlags &= ~SF_Aggregate;

    /* Create the ORDER BY clause for the sub-select. This is the concatenation
    ** of the window PARTITION and ORDER BY clauses. Then, if this makes it
    ** redundant, remove the ORDER BY from the parent SELECT.  */
    pSort = sqlite3ExprListDup(db, pMWin->pPartition, 0);
    pSort = exprListAppendList(pParse, pSort, pMWin->pOrderBy, 1);
    if( pSort && p->pOrderBy ){
................................................................................

    /* Assign a cursor number for the ephemeral table used to buffer rows.
    ** The OpenEphemeral instruction is coded later, after it is known how
    ** many columns the table will have.  */
    pMWin->iEphCsr = pParse->nTab++;
    pParse->nTab += 3;

    selectWindowRewriteEList(pParse, pMWin, pSrc, p->pEList, pTab, &pSublist);
    selectWindowRewriteEList(pParse, pMWin, pSrc, p->pOrderBy, pTab, &pSublist);
    pMWin->nBufferCol = (pSublist ? pSublist->nExpr : 0);

    /* Append the PARTITION BY and ORDER BY expressions to the to the 
    ** sub-select expression list. They are required to figure out where 
    ** boundaries for partitions and sets of peer rows lie.  */
    pSublist = exprListAppendList(pParse, pSublist, pMWin->pPartition, 0);
    pSublist = exprListAppendList(pParse, pSublist, pMWin->pOrderBy, 0);
................................................................................
    }

    pSub = sqlite3SelectNew(
        pParse, pSublist, pSrc, pWhere, pGroupBy, pHaving, pSort, 0, 0
    );
    p->pSrc = sqlite3SrcListAppend(pParse, 0, 0, 0);
    if( p->pSrc ){
      Table *pTab2;
      p->pSrc->a[0].pSelect = pSub;
      sqlite3SrcListAssignCursors(pParse, p->pSrc);

      pSub->selFlags |= SF_Expanded;
      pTab2 = sqlite3ResultSetOfSelect(pParse, pSub);
      if( pTab2==0 ){
        rc = SQLITE_NOMEM;
      }else{



        memcpy(pTab, pTab2, sizeof(Table));
        pTab->tabFlags |= TF_Ephemeral;
        p->pSrc->a[0].pTab = pTab;
        pTab = pTab2;
      }

      sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pMWin->iEphCsr, pSublist->nExpr);
      sqlite3VdbeAddOp2(v, OP_OpenDup, pMWin->iEphCsr+1, pMWin->iEphCsr);
      sqlite3VdbeAddOp2(v, OP_OpenDup, pMWin->iEphCsr+2, pMWin->iEphCsr);
      sqlite3VdbeAddOp2(v, OP_OpenDup, pMWin->iEphCsr+3, pMWin->iEphCsr);
    }else{
      sqlite3SelectDelete(db, pSub);
    }
    if( db->mallocFailed ) rc = SQLITE_NOMEM;
    sqlite3DbFree(db, pTab);
  }

  return rc;
}

/*
** Free the Window object passed as the second argument.
................................................................................
        { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE,      SQLITE_NoCkptOnClose  },
        { SQLITE_DBCONFIG_ENABLE_QPSG,           SQLITE_EnableQPSG     },
        { SQLITE_DBCONFIG_TRIGGER_EQP,           SQLITE_TriggerEQP     },
        { SQLITE_DBCONFIG_RESET_DATABASE,        SQLITE_ResetDatabase  },
        { SQLITE_DBCONFIG_DEFENSIVE,             SQLITE_Defensive      },
        { SQLITE_DBCONFIG_WRITABLE_SCHEMA,       SQLITE_WriteSchema|
                                                 SQLITE_NoSchemaError  },
        { SQLITE_DBCONFIG_LEGACY_ALTER_TABLE,    SQLITE_LegacyAlter    },
        { SQLITE_DBCONFIG_DQS_DDL,               SQLITE_DqsDDL         },
        { SQLITE_DBCONFIG_DQS_DML,               SQLITE_DqsDML         },
      };
      unsigned int i;
      rc = SQLITE_ERROR; /* IMP: R-42790-23372 */
      for(i=0; i<ArraySize(aFlagOp); i++){
        if( aFlagOp[i].op==op ){
          int onoff = va_arg(ap, int);
          int *pRes = va_arg(ap, int*);
................................................................................
      break;
    }
  }
  va_end(ap);
  return rc;
}










/*
** This is the default collating function named "BINARY" which is always
** available.



*/
static int binCollFunc(
  void *NotUsed,
  int nKey1, const void *pKey1,
  int nKey2, const void *pKey2
){
  int rc, n;
  UNUSED_PARAMETER(NotUsed);
  n = nKey1<nKey2 ? nKey1 : nKey2;
  /* EVIDENCE-OF: R-65033-28449 The built-in BINARY collation compares
  ** strings byte by byte using the memcmp() function from the standard C
  ** library. */
  assert( pKey1 && pKey2 );
  rc = memcmp(pKey1, pKey2, n);
  if( rc==0 ){










    rc = nKey1 - nKey2;
  }

  return rc;
}

/*
** This is the collating function named "RTRIM" which is always
** available.  Ignore trailing spaces.
*/
static int rtrimCollFunc(
  void *pUser,
  int nKey1, const void *pKey1,
  int nKey2, const void *pKey2
){
  const u8 *pK1 = (const u8*)pKey1;
  const u8 *pK2 = (const u8*)pKey2;
  while( nKey1 && pK1[nKey1-1]==' ' ) nKey1--;
  while( nKey2 && pK2[nKey2-1]==' ' ) nKey2--;
  return binCollFunc(pUser, nKey1, pKey1, nKey2, pKey2);
}

/*
** Return true if CollSeq is the default built-in BINARY.
*/
SQLITE_PRIVATE int sqlite3IsBinary(const CollSeq *p){
  assert( p==0 || p->xCmp!=binCollFunc || strcmp(p->zName,"BINARY")==0 );

  return p==0 || p->xCmp==binCollFunc;
}

/*
** Another built-in collating sequence: NOCASE. 
**
** This collating sequence is intended to be used for "case independent
** comparison". SQLite's knowledge of upper and lower case equivalents
................................................................................
  memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
  db->aLimit[SQLITE_LIMIT_WORKER_THREADS] = SQLITE_DEFAULT_WORKER_THREADS;
  db->autoCommit = 1;
  db->nextAutovac = -1;
  db->szMmap = sqlite3GlobalConfig.szMmap;
  db->nextPagesize = 0;
  db->nMaxSorterMmap = 0x7FFFFFFF;
  db->flags |= SQLITE_ShortColNames
                 | SQLITE_EnableTrigger
                 | SQLITE_CacheSpill

/* The SQLITE_DQS compile-time option determines the default settings
** for SQLITE_DBCONFIG_DQS_DDL and SQLITE_DBCONFIG_DQS_DML.
**
**    SQLITE_DQS     SQLITE_DBCONFIG_DQS_DDL    SQLITE_DBCONFIG_DQS_DML
**    ----------     -----------------------    -----------------------
**     undefined               on                          on   
**         3                   on                          on
**         2                   on                         off
**         1                  off                          on
**         0                  off                         off
**
** Legacy behavior is 3 (double-quoted string literals are allowed anywhere)
** and so that is the default.  But developers are encouranged to use
** -DSQLITE_DQS=0 (best) or -DSQLITE_DQS=1 (second choice) if possible.
*/
#if !defined(SQLITE_DQS)
# define SQLITE_DQS 3
#endif
#if (SQLITE_DQS&1)==1
                 | SQLITE_DqsDML
#endif
#if (SQLITE_DQS&2)==2
                 | SQLITE_DqsDDL
#endif

#if !defined(SQLITE_DEFAULT_AUTOMATIC_INDEX) || SQLITE_DEFAULT_AUTOMATIC_INDEX
                 | SQLITE_AutoIndex
#endif
#if SQLITE_DEFAULT_CKPTFULLFSYNC
                 | SQLITE_CkptFullFSync
#endif
#if SQLITE_DEFAULT_FILE_FORMAT<4
................................................................................
  ** EVIDENCE-OF: R-52786-44878 SQLite defines three built-in collating
  ** functions:
  */
  createCollation(db, sqlite3StrBINARY, SQLITE_UTF8, 0, binCollFunc, 0);
  createCollation(db, sqlite3StrBINARY, SQLITE_UTF16BE, 0, binCollFunc, 0);
  createCollation(db, sqlite3StrBINARY, SQLITE_UTF16LE, 0, binCollFunc, 0);
  createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0);
  createCollation(db, "RTRIM", SQLITE_UTF8, 0, rtrimCollFunc, 0);
  if( db->mallocFailed ){
    goto opendb_out;
  }
  /* EVIDENCE-OF: R-08308-17224 The default collating function for all
  ** strings is BINARY. 
  */
  db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, sqlite3StrBINARY, 0);
................................................................................

      for(i=nHeight+1; i<FTS_MAX_APPENDABLE_HEIGHT; i++){
        pWriter->aNodeWriter[i].iBlock = pWriter->iStart + i*pWriter->nLeafEst;
      }

      pNode = &pWriter->aNodeWriter[nHeight];
      pNode->iBlock = pWriter->iStart + pWriter->nLeafEst*nHeight;
      blobGrowBuffer(&pNode->block, 
          MAX(nRoot, p->nNodeSize)+FTS3_NODE_PADDING, &rc
      );
      if( rc==SQLITE_OK ){
        memcpy(pNode->block.a, aRoot, nRoot);
        pNode->block.n = nRoot;
        memset(&pNode->block.a[nRoot], 0, FTS3_NODE_PADDING);
      }

      for(i=nHeight; i>=0 && rc==SQLITE_OK; i--){
        NodeReader reader;
        pNode = &pWriter->aNodeWriter[i];

        rc = nodeReaderInit(&reader, pNode->block.a, pNode->block.n);
................................................................................
            pNode->key.n = reader.term.n;
            if( i>0 ){
              char *aBlock = 0;
              int nBlock = 0;
              pNode = &pWriter->aNodeWriter[i-1];
              pNode->iBlock = reader.iChild;
              rc = sqlite3Fts3ReadBlock(p, reader.iChild, &aBlock, &nBlock, 0);
              blobGrowBuffer(&pNode->block, 
                  MAX(nBlock, p->nNodeSize)+FTS3_NODE_PADDING, &rc
              );
              if( rc==SQLITE_OK ){
                memcpy(pNode->block.a, aBlock, nBlock);
                pNode->block.n = nBlock;
                memset(&pNode->block.a[nBlock], 0, FTS3_NODE_PADDING);
              }
              sqlite3_free(aBlock);
            }
          }
        }
        nodeReaderRelease(&reader);
      }
................................................................................
      pRoot = &pParse->aNode[iRoot];
      j = 1;
    }
    if( pApnd ){
      u32 iStart, iLabel;
      JsonNode *pNode;
      iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0);
      iLabel = jsonParseAddNode(pParse, JSON_STRING, nKey, zKey);
      zPath += i;
      pNode = jsonLookupAppend(pParse, zPath, pApnd, pzErr);
      if( pParse->oom ) return 0;
      if( pNode ){
        pRoot = &pParse->aNode[iRoot];
        pRoot->u.iAppend = iStart - iRoot;
        pRoot->jnFlags |= JNODE_APPEND;
................................................................................
static void fts5SourceIdFunc(
  sqlite3_context *pCtx,          /* Function call context */
  int nArg,                       /* Number of args */
  sqlite3_value **apUnused        /* Function arguments */
){
  assert( nArg==0 );
  UNUSED_PARAM2(nArg, apUnused);
  sqlite3_result_text(pCtx, "fts5: 2019-07-08 13:45:02 8fb0c6d5a38e77aa4c5f394fb8af1b0c7c6a4790e932aabc213a3078ee9acaf6", -1, SQLITE_TRANSIENT);
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts5ShadowName(const char *zName){
................................................................................
#endif
  return rc;
}
#endif /* SQLITE_CORE */
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */

/************** End of stmt.c ************************************************/
#if __LINE__!=223775
#undef SQLITE_SOURCE_ID
#define SQLITE_SOURCE_ID      "2019-07-08 13:45:02 8fb0c6d5a38e77aa4c5f394fb8af1b0c7c6a4790e932aabc213a3078ee9aalt2"
#endif
/* Return the source-id for this library */
SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
/************************** End of sqlite3.c ******************************/

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.29.0"
#define SQLITE_VERSION_NUMBER 3029000
#define SQLITE_SOURCE_ID      "2019-06-13 14:07:41 f8696b60eec0dcacfe92d9a31cbf1436d674140e5447de0cd1c2f52bff6c2be4"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
** to setting [PRAGMA writable_schema=ON] or [PRAGMA writable_schema=OFF].
** The first argument to this setting is an integer which is 0 to disable 
** the writable_schema, positive to enable writable_schema, or negative to
** leave the setting unchanged. The second parameter is a pointer to an
** integer into which is written 0 or 1 to indicate whether the writable_schema
** is enabled or disabled following this call.
** </dd>




























** </dl>
*/
#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
................................................................................
#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_QPSG           1007 /* int int* */
#define SQLITE_DBCONFIG_TRIGGER_EQP           1008 /* int int* */
#define SQLITE_DBCONFIG_RESET_DATABASE        1009 /* int int* */
#define SQLITE_DBCONFIG_DEFENSIVE             1010 /* int int* */
#define SQLITE_DBCONFIG_WRITABLE_SCHEMA       1011 /* int int* */



#define SQLITE_DBCONFIG_MAX                   1011 /* Largest DBCONFIG */

/*
** CAPI3REF: Enable Or Disable Extended Result Codes
** METHOD: sqlite3
**
** ^The sqlite3_extended_result_codes() routine enables or disables the
** [extended result codes] feature of SQLite. ^The extended result

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.29.0"
#define SQLITE_VERSION_NUMBER 3029000
#define SQLITE_SOURCE_ID      "2019-07-08 13:45:02 8fb0c6d5a38e77aa4c5f394fb8af1b0c7c6a4790e932aabc213a3078ee9acaf6"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
** to setting [PRAGMA writable_schema=ON] or [PRAGMA writable_schema=OFF].
** The first argument to this setting is an integer which is 0 to disable 
** the writable_schema, positive to enable writable_schema, or negative to
** leave the setting unchanged. The second parameter is a pointer to an
** integer into which is written 0 or 1 to indicate whether the writable_schema
** is enabled or disabled following this call.
** </dd>
**
** [[SQLITE_DBCONFIG_LEGACY_ALTER_TABLE]]
** <dt>SQLITE_DBCONFIG_LEGACY_ALTER_TABLE</dt>
** <dd>The SQLITE_DBCONFIG_LEGACY_ALTER_TABLE option activates or deactivates
** the legacy behavior of the [ALTER TABLE RENAME] command such it
** behaves as it did prior to [version 3.24.0] (2018-06-04).  See the
** "Compatibility Notice" on the [ALTER TABLE RENAME documentation] for
** additional information. This feature can also be turned on and off
** using the [PRAGMA legacy_alter_table] statement.
** </dd>
**
** [[SQLITE_DBCONFIG_DQS_DML]]
** <dt>SQLITE_DBCONFIG_DQS_DML</td>
** <dd>The SQLITE_DBCONFIG_DQS_DML option activates or deactivates
** the legacy [double-quoted string literal] misfeature for DML statement
** only, that is DELETE, INSERT, SELECT, and UPDATE statements. The
** default value of this setting is determined by the [-DSQLITE_DQS]
** compile-time option.
** </dd>
**
** [[SQLITE_DBCONFIG_DQS_DDL]]
** <dt>SQLITE_DBCONFIG_DQS_DDL</td>
** <dd>The SQLITE_DBCONFIG_DQS option activates or deactivates
** the legacy [double-quoted string literal] misfeature for DDL statements,
** such as CREATE TABLE and CREATE INDEX. The
** default value of this setting is determined by the [-DSQLITE_DQS]
** compile-time option.
** </dd>
** </dl>
*/
#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
................................................................................
#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_QPSG           1007 /* int int* */
#define SQLITE_DBCONFIG_TRIGGER_EQP           1008 /* int int* */
#define SQLITE_DBCONFIG_RESET_DATABASE        1009 /* int int* */
#define SQLITE_DBCONFIG_DEFENSIVE             1010 /* int int* */
#define SQLITE_DBCONFIG_WRITABLE_SCHEMA       1011 /* int int* */
#define SQLITE_DBCONFIG_LEGACY_ALTER_TABLE    1012 /* int int* */
#define SQLITE_DBCONFIG_DQS_DML               1013 /* int int* */
#define SQLITE_DBCONFIG_DQS_DDL               1014 /* int int* */
#define SQLITE_DBCONFIG_MAX                   1014 /* Largest DBCONFIG */

/*
** CAPI3REF: Enable Or Disable Extended Result Codes
** METHOD: sqlite3
**
** ^The sqlite3_extended_result_codes() routine enables or disables the
** [extended result codes] feature of SQLite. ^The extended result

UTILS_OBJ=$(UTILS:.exe=.obj)
UTILS_SRC=$(foreach uf,$(UTILS),$(SRCDIR)$(uf:.exe=.c))

# define the SQLite files, which need special flags on compile
SQLITESRC=sqlite3.c
ORIGSQLITESRC=$(foreach sf,$(SQLITESRC),$(SRCDIR)$(sf))
SQLITEOBJ=$(foreach sf,$(SQLITESRC),$(sf:.c=.obj))
SQLITEDEFINES=-DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_WIN32_NO_ANSI

# define the SQLite shell files, which need special flags on compile
SQLITESHELLSRC=shell.c
ORIGSQLITESHELLSRC=$(foreach sf,$(SQLITESHELLSRC),$(SRCDIR)$(sf))
SQLITESHELLOBJ=$(foreach sf,$(SQLITESHELLSRC),$(sf:.c=.obj))
SQLITESHELLDEFINES=-DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -Dmain=sqlite3_shell -DSQLITE_SHELL_IS_UTF8=1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -DUSE_SYSTEM_SQLITE=$(USE_SYSTEM_SQLITE) -DSQLITE_SHELL_DBNAME_PROC=sqlcmd_get_dbname -DSQLITE_SHELL_INIT_PROC=sqlcmd_init_proc -Daccess=file_access -Dsystem=fossil_system -Dgetenv=fossil_getenv -Dfopen=fossil_fopen

# define the th scripting files, which need special flags on compile
THSRC=th.c th_lang.c
ORIGTHSRC=$(foreach sf,$(THSRC),$(SRCDIR)$(sf))
THOBJ=$(foreach sf,$(THSRC),$(sf:.c=.obj))

# define the zlib files, needed by this compile

UTILS_OBJ=$(UTILS:.exe=.obj)
UTILS_SRC=$(foreach uf,$(UTILS),$(SRCDIR)$(uf:.exe=.c))

# define the SQLite files, which need special flags on compile
SQLITESRC=sqlite3.c
ORIGSQLITESRC=$(foreach sf,$(SQLITESRC),$(SRCDIR)$(sf))
SQLITEOBJ=$(foreach sf,$(SQLITESRC),$(sf:.c=.obj))
SQLITEDEFINES=-DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DQS=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_WIN32_NO_ANSI

# define the SQLite shell files, which need special flags on compile
SQLITESHELLSRC=shell.c
ORIGSQLITESHELLSRC=$(foreach sf,$(SQLITESHELLSRC),$(SRCDIR)$(sf))
SQLITESHELLOBJ=$(foreach sf,$(SQLITESHELLSRC),$(sf:.c=.obj))
SQLITESHELLDEFINES=-DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DQS=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -Dmain=sqlite3_shell -DSQLITE_SHELL_IS_UTF8=1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -DUSE_SYSTEM_SQLITE=$(USE_SYSTEM_SQLITE) -DSQLITE_SHELL_DBNAME_PROC=sqlcmd_get_dbname -DSQLITE_SHELL_INIT_PROC=sqlcmd_init_proc -Daccess=file_access -Dsystem=fossil_system -Dgetenv=fossil_getenv -Dfopen=fossil_fopen

# define the th scripting files, which need special flags on compile
THSRC=th.c th_lang.c
ORIGTHSRC=$(foreach sf,$(THSRC),$(SRCDIR)$(sf))
THOBJ=$(foreach sf,$(THSRC),$(sf:.c=.obj))

# define the zlib files, needed by this compile

SSL    =

CFLAGS = -o
BCC    = $(DMDIR)\bin\dmc $(CFLAGS)
TCC    = $(DMDIR)\bin\dmc $(CFLAGS) $(DMCDEF) $(SSL) $(INCL)
LIBS   = $(DMDIR)\extra\lib\ zlib wsock32 advapi32 dnsapi

SQLITE_OPTIONS = -DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB

SHELL_OPTIONS = -DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -Dmain=sqlite3_shell -DSQLITE_SHELL_IS_UTF8=1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -DUSE_SYSTEM_SQLITE=$(USE_SYSTEM_SQLITE) -DSQLITE_SHELL_DBNAME_PROC=sqlcmd_get_dbname -DSQLITE_SHELL_INIT_PROC=sqlcmd_init_proc -Daccess=file_access -Dsystem=fossil_system -Dgetenv=fossil_getenv -Dfopen=fossil_fopen

SRC   = add_.c alerts_.c allrepo_.c attach_.c backoffice_.c bag_.c bisect_.c blob_.c branch_.c browse_.c builtin_.c bundle_.c cache_.c capabilities_.c captcha_.c cgi_.c checkin_.c checkout_.c clearsign_.c clone_.c comformat_.c configure_.c content_.c cookies_.c db_.c delta_.c deltacmd_.c deltafunc_.c descendants_.c diff_.c diffcmd_.c dispatch_.c doc_.c encode_.c etag_.c event_.c export_.c file_.c finfo_.c foci_.c forum_.c fshell_.c fusefs_.c glob_.c graph_.c gzip_.c hname_.c http_.c http_socket_.c http_ssl_.c http_transport_.c import_.c info_.c json_.c json_artifact_.c json_branch_.c json_config_.c json_diff_.c json_dir_.c json_finfo_.c json_login_.c json_query_.c json_report_.c json_status_.c json_tag_.c json_timeline_.c json_user_.c json_wiki_.c leaf_.c loadctrl_.c login_.c lookslike_.c main_.c manifest_.c markdown_.c markdown_html_.c md5_.c merge_.c merge3_.c moderate_.c name_.c path_.c piechart_.c pivot_.c popen_.c pqueue_.c printf_.c publish_.c purge_.c rebuild_.c regexp_.c repolist_.c report_.c rss_.c schema_.c search_.c security_audit_.c setup_.c setupuser_.c sha1_.c sha1hard_.c sha3_.c shun_.c sitemap_.c skins_.c smtp_.c sqlcmd_.c stash_.c stat_.c statrep_.c style_.c sync_.c tag_.c tar_.c th_main_.c timeline_.c tkt_.c tktsetup_.c undo_.c unicode_.c unversioned_.c update_.c url_.c user_.c utf8_.c util_.c verify_.c vfile_.c webmail_.c wiki_.c wikiformat_.c winfile_.c winhttp_.c wysiwyg_.c xfer_.c xfersetup_.c zip_.c

OBJ   = $(OBJDIR)\add$O $(OBJDIR)\alerts$O $(OBJDIR)\allrepo$O $(OBJDIR)\attach$O $(OBJDIR)\backoffice$O $(OBJDIR)\bag$O $(OBJDIR)\bisect$O $(OBJDIR)\blob$O $(OBJDIR)\branch$O $(OBJDIR)\browse$O $(OBJDIR)\builtin$O $(OBJDIR)\bundle$O $(OBJDIR)\cache$O $(OBJDIR)\capabilities$O $(OBJDIR)\captcha$O $(OBJDIR)\cgi$O $(OBJDIR)\checkin$O $(OBJDIR)\checkout$O $(OBJDIR)\clearsign$O $(OBJDIR)\clone$O $(OBJDIR)\comformat$O $(OBJDIR)\configure$O $(OBJDIR)\content$O $(OBJDIR)\cookies$O $(OBJDIR)\db$O $(OBJDIR)\delta$O $(OBJDIR)\deltacmd$O $(OBJDIR)\deltafunc$O $(OBJDIR)\descendants$O $(OBJDIR)\diff$O $(OBJDIR)\diffcmd$O $(OBJDIR)\dispatch$O $(OBJDIR)\doc$O $(OBJDIR)\encode$O $(OBJDIR)\etag$O $(OBJDIR)\event$O $(OBJDIR)\export$O $(OBJDIR)\file$O $(OBJDIR)\finfo$O $(OBJDIR)\foci$O $(OBJDIR)\forum$O $(OBJDIR)\fshell$O $(OBJDIR)\fusefs$O $(OBJDIR)\glob$O $(OBJDIR)\graph$O $(OBJDIR)\gzip$O $(OBJDIR)\hname$O $(OBJDIR)\http$O $(OBJDIR)\http_socket$O $(OBJDIR)\http_ssl$O $(OBJDIR)\http_transport$O $(OBJDIR)\import$O $(OBJDIR)\info$O $(OBJDIR)\json$O $(OBJDIR)\json_artifact$O $(OBJDIR)\json_branch$O $(OBJDIR)\json_config$O $(OBJDIR)\json_diff$O $(OBJDIR)\json_dir$O $(OBJDIR)\json_finfo$O $(OBJDIR)\json_login$O $(OBJDIR)\json_query$O $(OBJDIR)\json_report$O $(OBJDIR)\json_status$O $(OBJDIR)\json_tag$O $(OBJDIR)\json_timeline$O $(OBJDIR)\json_user$O $(OBJDIR)\json_wiki$O $(OBJDIR)\leaf$O $(OBJDIR)\loadctrl$O $(OBJDIR)\login$O $(OBJDIR)\lookslike$O $(OBJDIR)\main$O $(OBJDIR)\manifest$O $(OBJDIR)\markdown$O $(OBJDIR)\markdown_html$O $(OBJDIR)\md5$O $(OBJDIR)\merge$O $(OBJDIR)\merge3$O $(OBJDIR)\moderate$O $(OBJDIR)\name$O $(OBJDIR)\path$O $(OBJDIR)\piechart$O $(OBJDIR)\pivot$O $(OBJDIR)\popen$O $(OBJDIR)\pqueue$O $(OBJDIR)\printf$O $(OBJDIR)\publish$O $(OBJDIR)\purge$O $(OBJDIR)\rebuild$O $(OBJDIR)\regexp$O $(OBJDIR)\repolist$O $(OBJDIR)\report$O $(OBJDIR)\rss$O $(OBJDIR)\schema$O $(OBJDIR)\search$O $(OBJDIR)\security_audit$O $(OBJDIR)\setup$O $(OBJDIR)\setupuser$O $(OBJDIR)\sha1$O $(OBJDIR)\sha1hard$O $(OBJDIR)\sha3$O $(OBJDIR)\shun$O $(OBJDIR)\sitemap$O $(OBJDIR)\skins$O $(OBJDIR)\smtp$O $(OBJDIR)\sqlcmd$O $(OBJDIR)\stash$O $(OBJDIR)\stat$O $(OBJDIR)\statrep$O $(OBJDIR)\style$O $(OBJDIR)\sync$O $(OBJDIR)\tag$O $(OBJDIR)\tar$O $(OBJDIR)\th_main$O $(OBJDIR)\timeline$O $(OBJDIR)\tkt$O $(OBJDIR)\tktsetup$O $(OBJDIR)\undo$O $(OBJDIR)\unicode$O $(OBJDIR)\unversioned$O $(OBJDIR)\update$O $(OBJDIR)\url$O $(OBJDIR)\user$O $(OBJDIR)\utf8$O $(OBJDIR)\util$O $(OBJDIR)\verify$O $(OBJDIR)\vfile$O $(OBJDIR)\webmail$O $(OBJDIR)\wiki$O $(OBJDIR)\wikiformat$O $(OBJDIR)\winfile$O $(OBJDIR)\winhttp$O $(OBJDIR)\wysiwyg$O $(OBJDIR)\xfer$O $(OBJDIR)\xfersetup$O $(OBJDIR)\zip$O $(OBJDIR)\shell$O $(OBJDIR)\sqlite3$O $(OBJDIR)\th$O $(OBJDIR)\th_lang$O


RC=$(DMDIR)\bin\rcc

SSL    =

CFLAGS = -o
BCC    = $(DMDIR)\bin\dmc $(CFLAGS)
TCC    = $(DMDIR)\bin\dmc $(CFLAGS) $(DMCDEF) $(SSL) $(INCL)
LIBS   = $(DMDIR)\extra\lib\ zlib wsock32 advapi32 dnsapi

SQLITE_OPTIONS = -DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DQS=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB

SHELL_OPTIONS = -DNDEBUG=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DQS=0 -DSQLITE_DEFAULT_MEMSTATUS=0 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_GET_TABLE -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_SHARED_CACHE -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_MAX_EXPR_DEPTH=0 -DSQLITE_USE_ALLOCA -DSQLITE_ENABLE_LOCKING_STYLE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_DBSTAT_VTAB -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS5 -DSQLITE_ENABLE_STMTVTAB -DSQLITE_HAVE_ZLIB -DSQLITE_INTROSPECTION_PRAGMAS -DSQLITE_ENABLE_DBPAGE_VTAB -Dmain=sqlite3_shell -DSQLITE_SHELL_IS_UTF8=1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -DUSE_SYSTEM_SQLITE=$(USE_SYSTEM_SQLITE) -DSQLITE_SHELL_DBNAME_PROC=sqlcmd_get_dbname -DSQLITE_SHELL_INIT_PROC=sqlcmd_init_proc -Daccess=file_access -Dsystem=fossil_system -Dgetenv=fossil_getenv -Dfopen=fossil_fopen

SRC   = add_.c alerts_.c allrepo_.c attach_.c backoffice_.c bag_.c bisect_.c blob_.c branch_.c browse_.c builtin_.c bundle_.c cache_.c capabilities_.c captcha_.c cgi_.c checkin_.c checkout_.c clearsign_.c clone_.c comformat_.c configure_.c content_.c cookies_.c db_.c delta_.c deltacmd_.c deltafunc_.c descendants_.c diff_.c diffcmd_.c dispatch_.c doc_.c encode_.c etag_.c event_.c export_.c file_.c finfo_.c foci_.c forum_.c fshell_.c fusefs_.c glob_.c graph_.c gzip_.c hname_.c http_.c http_socket_.c http_ssl_.c http_transport_.c import_.c info_.c json_.c json_artifact_.c json_branch_.c json_config_.c json_diff_.c json_dir_.c json_finfo_.c json_login_.c json_query_.c json_report_.c json_status_.c json_tag_.c json_timeline_.c json_user_.c json_wiki_.c leaf_.c loadctrl_.c login_.c lookslike_.c main_.c manifest_.c markdown_.c markdown_html_.c md5_.c merge_.c merge3_.c moderate_.c name_.c path_.c piechart_.c pivot_.c popen_.c pqueue_.c printf_.c publish_.c purge_.c rebuild_.c regexp_.c repolist_.c report_.c rss_.c schema_.c search_.c security_audit_.c setup_.c setupuser_.c sha1_.c sha1hard_.c sha3_.c shun_.c sitemap_.c skins_.c smtp_.c sqlcmd_.c stash_.c stat_.c statrep_.c style_.c sync_.c tag_.c tar_.c th_main_.c timeline_.c tkt_.c tktsetup_.c undo_.c unicode_.c unversioned_.c update_.c url_.c user_.c utf8_.c util_.c verify_.c vfile_.c webmail_.c wiki_.c wikiformat_.c winfile_.c winhttp_.c wysiwyg_.c xfer_.c xfersetup_.c zip_.c

OBJ   = $(OBJDIR)\add$O $(OBJDIR)\alerts$O $(OBJDIR)\allrepo$O $(OBJDIR)\attach$O $(OBJDIR)\backoffice$O $(OBJDIR)\bag$O $(OBJDIR)\bisect$O $(OBJDIR)\blob$O $(OBJDIR)\branch$O $(OBJDIR)\browse$O $(OBJDIR)\builtin$O $(OBJDIR)\bundle$O $(OBJDIR)\cache$O $(OBJDIR)\capabilities$O $(OBJDIR)\captcha$O $(OBJDIR)\cgi$O $(OBJDIR)\checkin$O $(OBJDIR)\checkout$O $(OBJDIR)\clearsign$O $(OBJDIR)\clone$O $(OBJDIR)\comformat$O $(OBJDIR)\configure$O $(OBJDIR)\content$O $(OBJDIR)\cookies$O $(OBJDIR)\db$O $(OBJDIR)\delta$O $(OBJDIR)\deltacmd$O $(OBJDIR)\deltafunc$O $(OBJDIR)\descendants$O $(OBJDIR)\diff$O $(OBJDIR)\diffcmd$O $(OBJDIR)\dispatch$O $(OBJDIR)\doc$O $(OBJDIR)\encode$O $(OBJDIR)\etag$O $(OBJDIR)\event$O $(OBJDIR)\export$O $(OBJDIR)\file$O $(OBJDIR)\finfo$O $(OBJDIR)\foci$O $(OBJDIR)\forum$O $(OBJDIR)\fshell$O $(OBJDIR)\fusefs$O $(OBJDIR)\glob$O $(OBJDIR)\graph$O $(OBJDIR)\gzip$O $(OBJDIR)\hname$O $(OBJDIR)\http$O $(OBJDIR)\http_socket$O $(OBJDIR)\http_ssl$O $(OBJDIR)\http_transport$O $(OBJDIR)\import$O $(OBJDIR)\info$O $(OBJDIR)\json$O $(OBJDIR)\json_artifact$O $(OBJDIR)\json_branch$O $(OBJDIR)\json_config$O $(OBJDIR)\json_diff$O $(OBJDIR)\json_dir$O $(OBJDIR)\json_finfo$O $(OBJDIR)\json_login$O $(OBJDIR)\json_query$O $(OBJDIR)\json_report$O $(OBJDIR)\json_status$O $(OBJDIR)\json_tag$O $(OBJDIR)\json_timeline$O $(OBJDIR)\json_user$O $(OBJDIR)\json_wiki$O $(OBJDIR)\leaf$O $(OBJDIR)\loadctrl$O $(OBJDIR)\login$O $(OBJDIR)\lookslike$O $(OBJDIR)\main$O $(OBJDIR)\manifest$O $(OBJDIR)\markdown$O $(OBJDIR)\markdown_html$O $(OBJDIR)\md5$O $(OBJDIR)\merge$O $(OBJDIR)\merge3$O $(OBJDIR)\moderate$O $(OBJDIR)\name$O $(OBJDIR)\path$O $(OBJDIR)\piechart$O $(OBJDIR)\pivot$O $(OBJDIR)\popen$O $(OBJDIR)\pqueue$O $(OBJDIR)\printf$O $(OBJDIR)\publish$O $(OBJDIR)\purge$O $(OBJDIR)\rebuild$O $(OBJDIR)\regexp$O $(OBJDIR)\repolist$O $(OBJDIR)\report$O $(OBJDIR)\rss$O $(OBJDIR)\schema$O $(OBJDIR)\search$O $(OBJDIR)\security_audit$O $(OBJDIR)\setup$O $(OBJDIR)\setupuser$O $(OBJDIR)\sha1$O $(OBJDIR)\sha1hard$O $(OBJDIR)\sha3$O $(OBJDIR)\shun$O $(OBJDIR)\sitemap$O $(OBJDIR)\skins$O $(OBJDIR)\smtp$O $(OBJDIR)\sqlcmd$O $(OBJDIR)\stash$O $(OBJDIR)\stat$O $(OBJDIR)\statrep$O $(OBJDIR)\style$O $(OBJDIR)\sync$O $(OBJDIR)\tag$O $(OBJDIR)\tar$O $(OBJDIR)\th_main$O $(OBJDIR)\timeline$O $(OBJDIR)\tkt$O $(OBJDIR)\tktsetup$O $(OBJDIR)\undo$O $(OBJDIR)\unicode$O $(OBJDIR)\unversioned$O $(OBJDIR)\update$O $(OBJDIR)\url$O $(OBJDIR)\user$O $(OBJDIR)\utf8$O $(OBJDIR)\util$O $(OBJDIR)\verify$O $(OBJDIR)\vfile$O $(OBJDIR)\webmail$O $(OBJDIR)\wiki$O $(OBJDIR)\wikiformat$O $(OBJDIR)\winfile$O $(OBJDIR)\winhttp$O $(OBJDIR)\wysiwyg$O $(OBJDIR)\xfer$O $(OBJDIR)\xfersetup$O $(OBJDIR)\zip$O $(OBJDIR)\shell$O $(OBJDIR)\sqlite3$O $(OBJDIR)\th$O $(OBJDIR)\th_lang$O


RC=$(DMDIR)\bin\rcc

$(OBJDIR)/zip.h:	$(OBJDIR)/headers

MINGW_OPTIONS = -D_HAVE__MINGW_H

SQLITE_OPTIONS = -DNDEBUG=1 \
                 -DSQLITE_THREADSAFE=0 \

                 -DSQLITE_DEFAULT_MEMSTATUS=0 \
                 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 -DSQLITE_OMIT_DECLTYPE \
                 -DSQLITE_OMIT_DEPRECATED \
                 -DSQLITE_OMIT_GET_TABLE \
                 -DSQLITE_OMIT_PROGRESS_CALLBACK \
................................................................................
                 -DSQLITE_WIN32_NO_ANSI \
                 $(MINGW_OPTIONS) \
                 -DSQLITE_USE_MALLOC_H \
                 -DSQLITE_USE_MSIZE

SHELL_OPTIONS = -DNDEBUG=1 \
                -DSQLITE_THREADSAFE=0 \

                -DSQLITE_DEFAULT_MEMSTATUS=0 \
                -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                -DSQLITE_OMIT_DECLTYPE \
                -DSQLITE_OMIT_DEPRECATED \
                -DSQLITE_OMIT_GET_TABLE \
                -DSQLITE_OMIT_PROGRESS_CALLBACK \

$(OBJDIR)/zip.h:	$(OBJDIR)/headers

MINGW_OPTIONS = -D_HAVE__MINGW_H

SQLITE_OPTIONS = -DNDEBUG=1 \
                 -DSQLITE_THREADSAFE=0 \
                 -DSQLITE_DQS=0 \
                 -DSQLITE_DEFAULT_MEMSTATUS=0 \
                 -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 -DSQLITE_OMIT_DECLTYPE \
                 -DSQLITE_OMIT_DEPRECATED \
                 -DSQLITE_OMIT_GET_TABLE \
                 -DSQLITE_OMIT_PROGRESS_CALLBACK \
................................................................................
                 -DSQLITE_WIN32_NO_ANSI \
                 $(MINGW_OPTIONS) \
                 -DSQLITE_USE_MALLOC_H \
                 -DSQLITE_USE_MSIZE

SHELL_OPTIONS = -DNDEBUG=1 \
                -DSQLITE_THREADSAFE=0 \
                -DSQLITE_DQS=0 \
                -DSQLITE_DEFAULT_MEMSTATUS=0 \
                -DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                -DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                -DSQLITE_OMIT_DECLTYPE \
                -DSQLITE_OMIT_DEPRECATED \
                -DSQLITE_OMIT_GET_TABLE \
                -DSQLITE_OMIT_PROGRESS_CALLBACK \

!if $(USE_SEE)!=0
TCC       = $(TCC) /DUSE_SEE=1
RCC       = $(RCC) /DUSE_SEE=1
!endif

SQLITE_OPTIONS = /DNDEBUG=1 \
                 /DSQLITE_THREADSAFE=0 \

                 /DSQLITE_DEFAULT_MEMSTATUS=0 \
                 /DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 /DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 /DSQLITE_OMIT_DECLTYPE \
                 /DSQLITE_OMIT_DEPRECATED \
                 /DSQLITE_OMIT_GET_TABLE \
                 /DSQLITE_OMIT_PROGRESS_CALLBACK \
................................................................................
                 /DSQLITE_HAVE_ZLIB \
                 /DSQLITE_INTROSPECTION_PRAGMAS \
                 /DSQLITE_ENABLE_DBPAGE_VTAB \
                 /DSQLITE_WIN32_NO_ANSI

SHELL_OPTIONS = /DNDEBUG=1 \
                /DSQLITE_THREADSAFE=0 \

                /DSQLITE_DEFAULT_MEMSTATUS=0 \
                /DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                /DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                /DSQLITE_OMIT_DECLTYPE \
                /DSQLITE_OMIT_DEPRECATED \
                /DSQLITE_OMIT_GET_TABLE \
                /DSQLITE_OMIT_PROGRESS_CALLBACK \

!if $(USE_SEE)!=0
TCC       = $(TCC) /DUSE_SEE=1
RCC       = $(RCC) /DUSE_SEE=1
!endif

SQLITE_OPTIONS = /DNDEBUG=1 \
                 /DSQLITE_THREADSAFE=0 \
                 /DSQLITE_DQS=0 \
                 /DSQLITE_DEFAULT_MEMSTATUS=0 \
                 /DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                 /DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                 /DSQLITE_OMIT_DECLTYPE \
                 /DSQLITE_OMIT_DEPRECATED \
                 /DSQLITE_OMIT_GET_TABLE \
                 /DSQLITE_OMIT_PROGRESS_CALLBACK \
................................................................................
                 /DSQLITE_HAVE_ZLIB \
                 /DSQLITE_INTROSPECTION_PRAGMAS \
                 /DSQLITE_ENABLE_DBPAGE_VTAB \
                 /DSQLITE_WIN32_NO_ANSI

SHELL_OPTIONS = /DNDEBUG=1 \
                /DSQLITE_THREADSAFE=0 \
                /DSQLITE_DQS=0 \
                /DSQLITE_DEFAULT_MEMSTATUS=0 \
                /DSQLITE_DEFAULT_WAL_SYNCHRONOUS=1 \
                /DSQLITE_LIKE_DOESNT_MATCH_BLOBS \
                /DSQLITE_OMIT_DECLTYPE \
                /DSQLITE_OMIT_DEPRECATED \
                /DSQLITE_OMIT_GET_TABLE \
                /DSQLITE_OMIT_PROGRESS_CALLBACK \