**    sync        Run a "sync" on all repositories.  Only the --verbose
**                option is supported.
**
**    setting     Run the "setting", "set", or "unset" commands on all
**    set         repositories.  These command are particularly useful in
**    unset       conjunction with the "max-loadavg" setting which cannot
**                otherwise be set globally.
**
**    server      Run the "ui" or "server" commands on all repositories.
**    ui          The root URI gives a listing of all repos.
**
**
** In addition, the following maintenance operations are supported:
**
**    add         Add all the repositories named to the set of repositories
**                tracked by Fossil.  Normally Fossil is able to keep up with
**                this list by itself, but sometimes it can benefit from this
**                hint if you rename repositories.

    usage("SUBCOMMAND ...");
  }
  n = strlen(g.argv[2]);
  db_open_config(1, 0);
  blob_zero(&extra);
  zCmd = g.argv[2];
  if( !login_is_nobody() ) blob_appendf(&extra, " -U %s", g.zLogin);
  if( strncmp(zCmd, "ui", n)==0 || strncmp(zCmd, "server", n)==0 ){
    g.argv[1] = g.argv[2];
    g.argv[2] = "/";
    cmd_webserver();
    return;
  }
  if( strncmp(zCmd, "list", n)==0 || strncmp(zCmd,"ls",n)==0 ){
    zCmd = "list";
    useCheckouts = find_option("ckout","c",0)!=0;
  }else if( strncmp(zCmd, "clean", n)==0 ){
    zCmd = "clean --chdir";
    collect_argument(&extra, "allckouts",0);
    collect_argument_value(&extra, "case-sensitive");

  }else if( strncmp(zCmd, "cache", n)==0 ){
    zCmd = "cache -R";
    showLabel = 1;
    collect_argv(&extra, 3);
  }else{
    fossil_fatal("\"all\" subcommand should be one of: "
                 "add cache changes clean dbstat extras fts-config ignore "
                 "info list ls pull push rebuild server setting sync ui unset");
  }
  verify_all_options();
  zFossil = quoteFilename(g.nameOfExe);
  db_multi_exec("CREATE TEMP TABLE repolist(name,tag);");
  if( useCheckouts ){
    db_multi_exec(
       "INSERT INTO repolist "

*/
void file_test_valid_for_windows(void){
  int i;
  for(i=2; i<g.argc; i++){
    fossil_print("%s %s\n", file_is_win_reserved(g.argv[i]), g.argv[i]);
  }
}

/*
** Remove surplus "/" characters from the beginning of a full pathname.
** Extra leading "/" characters are benign on unix.  But on Windows
** machines, they must be removed.  Example:  Convert "/C:/fossil/xyx.fossil"
** into "c:/fossil/xyz.fossil".
*/
const char *file_cleanup_fullpath(const char *z){
#ifdef _WIN32
  if( z[0]=='/' && fossil_isalpha(z[1]) && z[2]==':' && z[3]=='/' ) z++;
#else
  while( z[0]=='/' && z[1]=='/' ) z++;
#endif
  return z;
}

  int localOpen;          /* True if the local database is open */
  char *zLocalRoot;       /* The directory holding the  local database */
  int minPrefix;          /* Number of digits needed for a distinct UUID */
  int fSqlTrace;          /* True if --sqltrace flag is present */
  int fSqlStats;          /* True if --sqltrace or --sqlstats are present */
  int fSqlPrint;          /* True if -sqlprint flag is present */
  int fQuiet;             /* True if -quiet flag is present */
  int fJail;              /* True if running with a chroot jail */
  int fHttpTrace;         /* Trace outbound HTTP requests */
  int fAnyTrace;          /* Any kind of tracing */
  char *zHttpAuth;        /* HTTP Authorization user:pass information */
  int fSystemTrace;       /* Trace calls to fossil_system(), --systemtrace */
  int fSshTrace;          /* Trace the SSH setup traffic */
  int fSshClient;         /* HTTP client flags for SSH client */
  char *zSshCmd;          /* SSH command string */

    file_canonical_name(zRepo, &dir, 0);
    zDir = blob_str(&dir);
    if( !noJail ){
      if( file_isdir(zDir)==1 ){
        if( file_chdir(zDir, 1) ){
          fossil_fatal("unable to chroot into %s", zDir);
        }
        g.fJail = 1;
        zRepo = "/";
      }else{
        for(i=strlen(zDir)-1; i>0 && zDir[i]!='/'; i--){}
        if( zDir[i]!='/' ) fossil_fatal("bad repository name: %s", zRepo);
        if( i>0 ){
          zDir[i] = 0;
          if( file_chdir(zDir, 1) ){

#endif
  return zRepo;
}

/*
** Generate a web-page that lists all repositories located under the
** g.zRepositoryName directory and return non-zero.
**
** For the special case when g.zRepositoryName a non-chroot-jail "/",
** compose the list using the "repo:" entries in the global_config
** table of the configuration database.  These entries comprise all
** of the repositories known to the "all" command.  The special case
** processing is disallowed for chroot jails because g.zRepositoryName
** is always "/" inside a chroot jail and so it cannot be used as a flag
** to signal the special processing in that case.  The special case
** processing is intended for the "fossil all ui" command which never
** runs in a chroot jail anyhow.
**
** Or, if no repositories can be located beneath g.zRepositoryName,
** return 0.
*/
static int repo_list_page(void){
  Blob base;
  int n = 0;

  assert( g.db==0 );
  if( fossil_strcmp(g.zRepositoryName,"/")==0 && !g.fJail ){
    /* For the special case of the "repository directory" being "/",
    ** show all of the repositories named in the ~/.fossil database.
    **
    ** On unix systems, then entries are of the form "repo:/home/..."
    ** and on Windows systems they are like "repo:C:/Users/...".  We want
    ** to skip the first 6 characters on unix and the first 5 characters
    ** on Windows.
    */
    db_open_config(1, 0);
#ifdef _WIN32
    db_multi_exec(
       "CREATE TEMP VIEW sfile AS"
       "  SELECT substr(name,6) AS 'pathname' FROM global_config"
       "   WHERE name GLOB 'repo:*'"
    );
#else
    db_multi_exec(
       "CREATE TEMP VIEW sfile AS"
       "  SELECT substr(name,7) AS 'pathname' FROM global_config"
       "   WHERE name GLOB 'repo:*'"
    );
#endif
  }else{
    /* The default case:  All repositories under the g.zRepositoryName
    ** directory.
    */
    blob_init(&base, g.zRepositoryName, -1);
    sqlite3_open(":memory:", &g.db);
    db_multi_exec("CREATE TABLE sfile(pathname TEXT);");
    db_multi_exec("CREATE TABLE vfile(pathname);");
    vfile_scan(&base, blob_size(&base), 0, 0, 0);
    db_multi_exec("DELETE FROM sfile WHERE pathname NOT GLOB '*[^/].fossil'");



  }
  @ <html>
  @ <head>
  @ <base href="%s(g.zBaseURL)/" />
  @ <title>Repository List</title>
  @ </head>
  @ <body>
  n = db_int(0, "SELECT count(*) FROM sfile");
  if( n>0 ){
    Stmt q;
    @ <h1>Available Repositories:</h1>
    @ <ol>
    db_prepare(&q, "SELECT pathname, substr(pathname,-7,-100000)||'/home'"
                   " FROM sfile ORDER BY pathname COLLATE nocase;");
    while( db_step(&q)==SQLITE_ROW ){
      const char *zName = db_column_text(&q, 0);
      const char *zUrl = db_column_text(&q, 1);
      @ <li><a href="%R/%T(zUrl)" target="_blank">%h(zName)</a></li>
    }
    @ </ol>
  }else{
    @ <h1>No Repositories Found</h1>
  }
  @ </body>
  @ </html>
  cgi_reply();

  sqlite3_close(g.db);
  g.db = 0;
  return n;
}

/*
** Preconditions:

** If no suitable webpage is found, try to redirect to zNotFound.
*/
static void process_one_web_page(
  const char *zNotFound,      /* Redirect here on a 404 if not NULL */
  Glob *pFileGlob,            /* Deliver static files matching */
  int allowRepoList           /* Send repo list for "/" URL */
){
  const char *zPathInfo = PD("PATH_INFO", "");

  char *zPath = NULL;
  int i;
  const CmdOrPage *pCmd = 0;
  const char *zBase = g.zRepositoryName;

  /* Handle universal query parameters */
  if( PB("utc") ){
    g.fTimeFormat = 1;
  }else if( PB("localtime") ){
    g.fTimeFormat = 2;
  }

  /* If the repository has not been opened already, then find the
  ** repository based on the first element of PATH_INFO and open it.
  */











  if( !g.repositoryOpen ){
    char *zRepo;               /* Candidate repository name */
    char *zToFree = 0;         /* Malloced memory that needs to be freed */
    const char *zCleanRepo;    /* zRepo with surplus leading "/" removed */
    const char *zOldScript = PD("SCRIPT_NAME", "");  /* Original SCRIPT_NAME */
    char *zNewScript;          /* Revised SCRIPT_NAME after processing */
    int j, k;                  /* Loop variables */
    i64 szFile;                /* File size of the candidate repository */

    i = zPathInfo[0]!=0;
    if( fossil_strcmp(g.zRepositoryName, "/")==0 ){
      zBase++;
#ifdef _WIN32
      if( sqlite3_strglob("/[a-zA-Z]:/*", zPathInfo)==0 ) i = 4;
#endif
    }
    while( 1 ){
      while( zPathInfo[i] && zPathInfo[i]!='/' ){ i++; }

      /* The candidate repository name is some prefix of the PATH_INFO
      ** with ".fossil" appended */
      zRepo = zToFree = mprintf("%s%.*s.fossil",zBase,i,zPathInfo);
      if( g.fHttpTrace ){
        @ <!-- Looking for repository named "%h(zRepo)" -->
        fprintf(stderr, "# looking for repository named \"%s\"\n", zRepo);
      }


      /* For safety -- to prevent an attacker from accessing arbitrary disk
      ** files by sending a maliciously crafted request URI to a public
      ** server -- make sure the repository basename contains no
      ** characters other than alphanumerics, "/", "_", "-", and ".", and
      ** that "-" never occurs immediately after a "/" and that "." is always
      ** surrounded by two alphanumerics.  Any character that does not
      ** satisfy these constraints is converted into "_".
      */
      szFile = 0;
      for(j=strlen(zBase)+1, k=0; zRepo[j] && k<i-1; j++, k++){
        char c = zRepo[j];
        if( fossil_isalnum(c) ) continue;
#ifdef _WIN32
        /* Allow names to begin with "/X:/" on windows */
        if( c==':' && j==2 && sqlite3_strglob("/[a-zA-Z]:/*", zRepo)==0 ){
          continue;
        }
#endif
        if( c=='/' ) continue;
        if( c=='_' ) continue;
        if( c=='-' && zRepo[j-1]!='/' ) continue;
        if( c=='.' && fossil_isalnum(zRepo[j-1]) && fossil_isalnum(zRepo[j+1])){
          continue;
        }
        /* If we reach this point, it means that the request URI contains
        ** an illegal character or character combination.  Provoke a
        ** "Not Found" error. */
        szFile = 1;
        if( g.fHttpTrace ){
          @ <!-- Unsafe pathname rejected: "%h(zRepo)" -->
          fprintf(stderr, "# unsafe pathname rejected: %s\n", zRepo);
        }
        break;
      }

      /* Check to see if a file name zRepo exists.  If a file named zRepo
      ** does not exist, szFile will become -1.  If the file does exist,
      ** then szFile will become zero (for an empty file) or positive.
      ** Special case:  Assume any file with a basename of ".fossil" does
      ** not exist.
      */
      zCleanRepo = file_cleanup_fullpath(zRepo);
      if( szFile==0 && sqlite3_strglob("*/.fossil",zRepo)!=0 ){

        szFile = file_size(zCleanRepo);

        if( g.fHttpTrace ){
          @ <!-- file_size(%h(zCleanRepo)) is %lld(szFile) -->

          fprintf(stderr, "# file_size(%s) = %lld\n", zCleanRepo, szFile);

        }
      }

      /* If no file named by zRepo exists, remove the added ".fossil" suffix
      ** and check to see if there is a file or directory with the same
      ** name as the raw PATH_INFO text.
      */
      if( szFile<0 && i>0 ){
        const char *zMimetype;
        assert( fossil_strcmp(&zRepo[j], ".fossil")==0 ); 
        zRepo[j] = 0;  /* Remove the ".fossil" suffix */

        /* The PATH_INFO prefix seen so far is a valid directory.
        ** Continue the loop with the next element of the PATH_INFO */
        if( zPathInfo[i]=='/' && file_isdir(zCleanRepo)==1 ){
          fossil_free(zToFree);
          i++;
          continue;
        }

        /* If zRepo is the name of an ordinary file that matches the
        ** "--file GLOB" pattern, then the CGI reply is the text of
        ** of the file.
        **
        ** For safety, do not allow any file whose name contains ".fossil"
        ** to be returned this way, to prevent complete repositories from
        ** being delivered accidently.  This is not intended to be a
        ** general-purpose web server.  The "--file GLOB" mechanism is
        ** designed to allow the delivery of a few static images or HTML
        ** pages.
        */
        if( pFileGlob!=0
         && file_isfile(zCleanRepo)
         && glob_match(pFileGlob, file_cleanup_fullpath(zRepo))
         && sqlite3_strglob("*.fossil*",zRepo)!=0
         && (zMimetype = mimetype_from_name(zRepo))!=0
         && strcmp(zMimetype, "application/x-fossil-artifact")!=0
        ){
          Blob content;
          blob_read_from_file(&content, file_cleanup_fullpath(zRepo));
          cgi_set_content_type(zMimetype);
          cgi_set_content(&content);
          cgi_reply();
          return;
        }
        zRepo[j] = '.';
      }

      /* If we reach this point, it means that the search of the PATH_INFO
      ** string is finished.  Either zRepo contains the name of the
      ** repository to be used, or else no repository could be found an
      ** some kind of error response is required.
      */
      if( szFile<1024 ){
        set_base_url(0);
        if( strcmp(zPathInfo,"/")==0
                  && allowRepoList
                  && repo_list_page() ){
          /* Will return a list of repositories */
        }else if( zNotFound ){

          cgi_set_status(404, "not found");
          cgi_reply();
        }
        return;
      }
      break;
    }

    /* Add the repository name (without the ".fossil" suffix) to the end
    ** of SCRIPT_NAME and g.zTop and g.zBaseURL and remove the repository
    ** name from the beginning of PATH_INFO.
    */
    zNewScript = mprintf("%s%.*s", zOldScript, i, zPathInfo);
    if( g.zTop ) g.zTop = mprintf("%s%.*s", g.zTop, i, zPathInfo);
    if( g.zBaseURL ) g.zBaseURL = mprintf("%s%.*s", g.zBaseURL, i, zPathInfo);
    cgi_replace_parameter("PATH_INFO", &zPathInfo[i+1]);
    zPathInfo += i;
    cgi_replace_parameter("SCRIPT_NAME", zNewScript);
    db_open_repository(file_cleanup_fullpath(zRepo));
    if( g.fHttpTrace ){
      @ <!-- repository: "%h(zRepo)" -->
      @ <!-- translated PATH_INFO: "%h(zPathInfo)" -->
      @ <!-- translated SCRIPT_NAME: "%h(zNewScript)" -->
      fprintf(stderr,
          "# repository: [%s]\n"
          "# translated PATH_INFO = [%s]\n"
          "# translated SCRIPT_NAME = [%s]\n",
          zRepo, zPathInfo, zNewScript);
      if( g.zTop ){
        @ <!-- translated g.zTop: "%h(g.zTop)" -->
        fprintf(stderr, "# translated g.zTop = [%s]\n", g.zTop);
      }
      if( g.zBaseURL ){
        @ <!-- translated g.zBaseURL: "%h(g.zBaseURL)" -->
        fprintf(stderr, "# translated g.zBaseURL = [%s]\n", g.zBaseURL);
      }
    }
  }

  /* At this point, the appropriate repository database file will have
  ** been opened.  Use the first element of PATH_INFO as the page name
  ** and deliver the appropriate page back to the user.

  */
  if( g.zContentType &&
      strncmp(g.zContentType, "application/x-fossil", 20)==0 ){
    /* Special case:  If the content mimetype shows that it is "fossil sync"
    ** payload, then pretend that the PATH_INFO is /xfer so that we always
    ** invoke the sync page. */
    zPathInfo = "/xfer";
  }
  set_base_url(0);
  if( zPathInfo==0 || zPathInfo[0]==0
      || (zPathInfo[0]=='/' && zPathInfo[1]==0) ){
    /* Second special case: If the PATH_INFO is blank, issue a redirect to
    ** the home page identified by the "index-page" setting in the repository
    ** CONFIG table, to "/index" if there no "index-page" setting. */
#ifdef FOSSIL_ENABLE_JSON
    if(g.json.isJsonMode){
      json_err(FSL_JSON_E_RESOURCE_NOT_FOUND,NULL,1);
      fossil_exit(0);
    }
#endif
    fossil_redirect_home() /*does not return*/;
  }else{
    zPath = mprintf("%s", zPathInfo);
  }

  /* Make g.zPath point to the first element of the path.  Make
  ** g.zExtra point to everything past that point.
  */
  while(1){
    g.zPath = &zPath[1];
    for(i=1; zPath[i] && zPath[i]!='/'; i++){}
    if( zPath[i]=='/' ){
      zPath[i] = 0;
      g.zExtra = &zPath[i+1];














































    }else{
      g.zExtra = 0;
    }
    break;
  }
#ifdef FOSSIL_ENABLE_JSON
  /*

** alphanumerics.  Any pathname that does not satisfy these constraints
** results in a 404 error.  Files in REPOSITORY that match the comma-separated
** list of glob patterns given by --files and that have known suffixes
** such as ".txt" or ".html" or ".jpeg" and do not match the pattern
** "*.fossil*" will be served as static content.  With the "ui" command,
** the REPOSITORY can only be a directory if the --notfound option is
** also present.
**
** For the special case REPOSITORY name of "/", the list global configuration
** database is consulted for a list of all known repositories.  The --repolist
** option is implied by this special case.  See also the "fossil all ui"
** command.
**
** By default, the "ui" command provides full administrative access without
** having to log in.  This can be disabled by turning off the "localauth"
** setting.  Automatic login for the "server" command is available if the
** --localauth option is present and the "localauth" setting is off and the
** connection is from localhost.  The "ui" command also enables --repolist
** by default.

  g.httpIn = stdin;
  g.httpOut = stdout;
  if( g.fHttpTrace || g.fSqlTrace ){
    fprintf(stderr, "====== SERVER pid %d =======\n", getpid());
  }
  g.cgiOutput = 1;
  find_server_repository(2, 0);
  if( fossil_strcmp(g.zRepositoryName,"/")==0 ){
    allowRepoList = 1;
  }else{
    g.zRepositoryName = enter_chroot_jail(g.zRepositoryName, noJail);
  }
  if( flags & HTTP_SERVER_SCGI ){
    cgi_handle_scgi_request();
  }else{
    cgi_handle_http_request(0);
  }
  process_one_web_page(zNotFound, glob_create(zFileGlob), allowRepoList);
#else