** repositories.  Used to create a "test" repository for development
** testing by cloning a working project repository.
*/
void test_detach_cmd(void){
  db_find_and_open_repository(0, 2);
  db_begin_transaction();
  db_multi_exec(
    "DELETE FROM config WHERE name GLOB 'last-sync-*';"
    "DELETE FROM config WHERE name GLOB 'sync-*:*';"
    "UPDATE config SET value=lower(hex(randomblob(20)))"
    " WHERE name='project-code';"
    "UPDATE config SET value='detached-' || value"
    " WHERE name='project-name' AND value NOT GLOB 'detached-*';"
  );
  db_end_transaction(0);
}

    bNeedRebuild = db_exists("SELECT 1 FROM private");
    delete_private_content();
  }
  if( !privateOnly ){
    db_multi_exec(
      "UPDATE user SET pw='';"
      "DELETE FROM config WHERE name GLOB 'last-sync-*';"
      "DELETE FROM config WHERE name GLOB 'sync-*:*';"
      "DELETE FROM config WHERE name GLOB 'peer-*';"
      "DELETE FROM config WHERE name GLOB 'login-group-*';"
      "DELETE FROM config WHERE name GLOB 'skin:*';"
      "DELETE FROM config WHERE name GLOB 'subrepo:*';"
      "DELETE FROM config WHERE name GLOB 'http-auth:*';"
      "DELETE FROM config WHERE name GLOB 'cert:*';"
    );

  remember_or_get_http_auth(zHttpAuth, urlFlags & URL_REMEMBER, zUrl);
  url_remember();
  if( g.url.protocol==0 ){
    if( urlOptional ) fossil_exit(0);
    usage("URL");
  }
  user_select();
  if( g.url.isAlias ){
    if( ((*pSyncFlags) & (SYNC_PUSH|SYNC_PULL))==(SYNC_PUSH|SYNC_PULL) ){
      fossil_print("Sync with %s\n", g.url.canonical);
    }else if( (*pSyncFlags) & SYNC_PUSH ){
      fossil_print("Push to %s\n", g.url.canonical);
    }else if( (*pSyncFlags) & SYNC_PULL ){
      fossil_print("Pull from %s\n", g.url.canonical);
    }

** Pull all sharable changes from a remote repository into the local
** repository.  Sharable changes include public check-ins, edits to
** wiki pages, tickets, and tech-notes, as well as forum content.  Add
** the --private option to pull private branches.  Use the
** "configuration pull" command to pull website configuration details.
**
** If URL is not specified, then the URL from the most recent clone, push,
** pull, remote, or sync command is used.  See "fossil help clone" for
** details on the URL formats.
**
** Options:
**
**   -B|--httpauth USER:PASS    Credentials for the simple HTTP auth protocol,
**                              if required by the remote website
**   --from-parent-project      Pull content from the parent project
**   --ipv4                     Use only IPv4, not IPv6
**   --once                     Do not remember URL for subsequent syncs
**   --private                  Pull private branches too
**   --project-code CODE        Use CODE as the project code
**   --proxy PROXY              Use the specified HTTP proxy
**   -R|--repository REPO       Local repository to pull into
**   --ssl-identity FILE        Local SSL credentials, if requested by remote
**   --ssh-command SSH          Use SSH as the "ssh" command
**   -v|--verbose               Additional (debugging) output
**   --verily                   Exchange extra information with the remote
**                              to ensure no content is overlooked
**
** See also: [[clone]], [[config]], [[push]], [[remote]], [[sync]]
*/
void pull_cmd(void){
  unsigned configFlags = 0;
  unsigned syncFlags = SYNC_PULL;
  unsigned urlOmitFlags = 0;
  const char *zAltPCode = find_option("project-code",0,1);
  if( find_option("from-parent-project",0,0)!=0 ){

** Push all sharable changes from the local repository to a remote
** repository.  Sharable changes include public check-ins, edits to
** wiki pages, tickets, and tech-notes, as well as forum content.  Use
** --private to also push private branches.  Use the "configuration
** push" command to push website configuration details.
**
** If URL is not specified, then the URL from the most recent clone, push,
** pull, remote, or sync command is used.  See "fossil help clone" for
** details on the URL formats.
**
** Options:
**
**   -B|--httpauth USER:PASS    Credentials for the simple HTTP auth protocol,
**                              if required by the remote website
**   --ipv4                     Use only IPv4, not IPv6
**   --once                     Do not remember URL for subsequent syncs
**   --proxy PROXY              Use the specified HTTP proxy
**   --private                  Push private branches too
**   -R|--repository REPO       Local repository to push from
**   --ssl-identity FILE        Local SSL credentials, if requested by remote
**   --ssh-command SSH          Use SSH as the "ssh" command
**   -v|--verbose               Additional (debugging) output
**   --verily                   Exchange extra information with the remote
**                              to ensure no content is overlooked
**
** See also: [[clone]], [[config]], [[pull]], [[remote]], [[sync]]
*/
void push_cmd(void){
  unsigned configFlags = 0;
  unsigned syncFlags = SYNC_PUSH;
  process_sync_args(&configFlags, &syncFlags, 0, 0);

  /* We should be done with options.. */

** Usage: %fossil sync ?URL? ?options?
**
** Synchronize all sharable changes between the local repository and a
** remote repository.  Sharable changes include public check-ins and
** edits to wiki pages, tickets, and technical notes.
**
** If URL is not specified, then the URL from the most recent clone, push,
** pull, remote, or sync command is used.  See "fossil help clone" for
** details on the URL formats.
**
** Options:
**
**   -B|--httpauth USER:PASS    Credentials for the simple HTTP auth protocol,
**                              if required by the remote website
**   --ipv4                     Use only IPv4, not IPv6
**   --once                     Do not remember URL for subsequent syncs
**   --proxy PROXY              Use the specified HTTP proxy
**   --private                  Sync private branches too
**   -R|--repository REPO       Local repository to sync with
**   --ssl-identity FILE        Local SSL credentials, if requested by remote
**   --ssh-command SSH          Use SSH as the "ssh" command
**   -u|--unversioned           Also sync unversioned content
**   -v|--verbose               Additional (debugging) output
**   --verily                   Exchange extra information with the remote
**                              to ensure no content is overlooked
**
** See also: [[clone]], [[pull]], [[push]], [[remote]]
*/
void sync_cmd(void){
  unsigned configFlags = 0;
  unsigned syncFlags = SYNC_PUSH|SYNC_PULL;
  if( find_option("unversioned","u",0)!=0 ){
    syncFlags |= SYNC_UNVERSIONED;
  }

  client_sync(syncFlags, 0, 0, 0);
}

/*
** COMMAND: remote
** COMMAND: remote-url*
**
** Usage: %fossil remote ?SUBCOMMAND ...?
**
** Use this command to view or modify the set of remote repositories
** used as the default target for sync, push, and pull and for autosync.
**
** The default remote is set automatically by a "clone" command or by any
** "sync", "push", or "pull" command that specifies an explicit URL
** and omits the --once flag.  The default remote is used by
** auto-syncing and by "sync", "push", and "pull" that omit the server URL.
** Additional remotes can be added using the "add" command or deleted
** using the "delete" command.  The name of any additional remote can be
** used as an argument to the "sync", "push", and "pull" commands where
** one would normally put a URL argument.
**
** See "fossil help clone" for further information about URL formats.
**
** The official name of this command is "remote-url" but most people
** use the shortened name "remote".
**
** > fossil remote
**
**     With no arguments, this command shows the current default remote.
**     Or if there is no default, it shows "off".  The default remote is
**     used by autosync.  The default remote is whatever URL was specified
**     for the most recent "sync", "push", or "pull" command that omitted
**     the --once option.
**
** > fossil remote add NAME URL
**
**     Add a new URL to the set of remotes.  The new URL is assigned the
**     symbolic identifier "NAME".  Subsequently, NAME can be used in place
**     of the full URL on commands like "push" and "pull".
**
** > fossil remote delete NAME
**
**     Delete a URL previously added by the "add" subcommand.
**
** > fossil remote list
**
**     Show all remote URLs
**
** > fossil remote off
**
**     Disable the default URL.  Use this as a shorthand to prevent
**     autosync while in airplane mode, for example.
**
** > fossil remote URL
**
**     Make URL the new default URL.  The prior default URL is replaced.
*/
void remote_url_cmd(void){
  char *zUrl, *zArg;
  int nArg;
  db_find_and_open_repository(0, 0);

  /* We should be done with options.. */
  verify_all_options();

  if( g.argc==2 ){
    /* "fossil remote" with no arguments:  Show the last sync URL. */
    zUrl = db_get("last-sync-url", 0);
    if( zUrl==0 ){
      fossil_print("off\n");
    }else{
      url_parse(zUrl, 0);
      fossil_print("%s\n", g.url.canonical);
    }
    return;
  }
  zArg = g.argv[2];
  nArg = (int)strlen(zArg);
  if( strcmp(zArg,"off")==0 ){
    /* fossil remote off
    ** Forget the last-sync-URL and its password
    */
    if( g.argc!=3 ) usage("off");
remote_delete_default:
    db_multi_exec(
      "DELETE FROM config WHERE name GLOB 'last-sync-*';"
    );
    return;
  }
  if( strncmp(zArg, "list", nArg)==0 || strcmp(zArg,"ls")==0 ){
    Stmt q;
    if( g.argc!=3 ) usage("list");
    db_prepare(&q,
      "SELECT 'default', value FROM config WHERE name='last-sync-url'"
      " UNION ALL "
      "SELECT substr(name,10), value FROM config"
      " WHERE name GLOB 'sync-url:*'"
      " ORDER BY 1"
    );
    while( db_step(&q)==SQLITE_ROW ){
      fossil_print("%-18s %s\n", db_column_text(&q,0), db_column_text(&q,1));
    }
    db_finalize(&q);
    return;
  }
  if( strcmp(zArg, "add")==0 ){
    char *zName;
    char *zUrl;
    UrlData x;
    if( g.argc!=5 ) usage("add NAME URL");
    memset(&x, 0, sizeof(x));
    zName = g.argv[3];
    zUrl = g.argv[4];
    if( strcmp(zName,"default")==0 ) goto remote_add_default;
    url_parse_local(zUrl, URL_PROMPT_PW, &x);
    db_begin_write();
    db_multi_exec(
       "REPLACE INTO config(name, value, mtime)"
       " VALUES('sync-url:%q',%Q,now())",
       zName, x.canonical
    );
    db_multi_exec(
       "REPLACE INTO config(name, value, mtime)"
       " VALUES('sync-pw:%q',obscure(%Q),now())",
       zName, x.passwd
    );
    db_commit_transaction();
    return;
  }
  if( strncmp(zArg, "delete", nArg)==0 ){
    char *zName;
    if( g.argc!=4 ) usage("delete NAME");
    zName = g.argv[3];
    if( strcmp(zName,"default")==0 ) goto remote_delete_default;
    db_begin_write();
    db_multi_exec("DELETE FROM config WHERE name glob 'sync-url:%q'", zName);
    db_multi_exec("DELETE FROM config WHERE name glob 'sync-pw:%q'", zName);
    db_commit_transaction();
    return;
  }
  if( sqlite3_strlike("http://%",zArg,0)==0
   || sqlite3_strlike("https://%",zArg,0)==0
   || sqlite3_strlike("ssh:%",zArg,0)==0
   || sqlite3_strlike("file:%",zArg,0)==0
   || db_exists("SELECT 1 FROM config WHERE name='sync-url:%q'",zArg)
  ){
remote_add_default:
    db_unset("last-sync-url", 0);
    db_unset("last-sync-pw", 0);

    url_parse(g.argv[2], URL_REMEMBER|URL_PROMPT_PW|URL_ASK_REMEMBER_PW);
    url_remember();
    return;
  }



  fossil_fatal("unknown command \"%s\" - should be a URL or one of: "

               "add delete list off", zArg);



}

/*
** COMMAND: backup*
**
** Usage: %fossil backup ?OPTIONS? FILE|DIRECTORY
**

/*
** The URL related data used with this subsystem.
*/
struct UrlData {
  int isFile;      /* True if a "file:" url */
  int isHttps;     /* True if a "https:" url */
  int isSsh;       /* True if an "ssh:" url */
  int isAlias;     /* Input URL was an alias */
  char *name;      /* Hostname for http: or filename for file: */
  char *hostname;  /* The HOST: parameter on http headers */
  const char *protocol; /* "http" or "https" or "ssh" */
  int port;        /* TCP port number for http: or https: */
  int dfltPort;    /* The default port for the given protocol */
  char *path;      /* Pathname for http: */
  char *user;      /* User id for http: */
  char *passwd;    /* Password for http: */
  char *canonical; /* Canonical representation of the URL */
  char *proxyAuth; /* Proxy-Authorizer: string */
  char *fossil;    /* The fossil query parameter on ssh: */
  unsigned flags;  /* Boolean flags controlling URL processing */
  int useProxy;    /* Used to remember that a proxy is in use */
  char *proxyUrlPath;
  int proxyOrigPort; /* Tunneled port number for https through proxy */
};
#endif /* INTERFACE */


/*
** Parse the given URL.  Or if zUrl is NULL, parse the URL in the
** last-sync-url setting using last-sync-pw as the password.  Store
** the parser results in the pUrlData object.  Populate members of pUrlData
** as follows:
**
**      isFile      True if FILE:
**      isHttps     True if HTTPS:
**      isSsh       True if SSH:
**      protocol    "http" or "https" or "file"
**      name        Hostname for HTTP:, HTTPS:, SSH:.  Filename for FILE:
**      port        TCP port number for HTTP or HTTPS.
**      dfltPort    Default TCP port number (80 or 443).
**      path        Path name for HTTP or HTTPS.
**      user        Userid.
**      passwd      Password.
**      hostname    HOST:PORT or just HOST if port is the default.
**      canonical   The URL in canonical form, omitting the password
**
** This routine differs from url_parse() in that this routine stores the
** results in pUrlData and does not change the values of global variables.
** The url_parse() routine puts its result in g.url.
*/
void url_parse_local(
  const char *zUrl,
  unsigned int urlFlags,
  UrlData *pUrlData
){
  int i, j, c;
  char *zFile = 0;

  if( zUrl==0 || strcmp(zUrl,"default")==0 ){
    zUrl = db_get("last-sync-url", 0);
    if( zUrl==0 ) return;
    if( pUrlData->passwd==0 ){
      pUrlData->passwd = unobscure(db_get("last-sync-pw", 0));
    }
    pUrlData->isAlias = 1;
  }else{
    char *zKey = sqlite3_mprintf("sync-url:%q", zUrl);
    char *zAlt = db_get(zKey, 0);
    sqlite3_free(zKey);
    if( zAlt ){
      pUrlData->passwd = unobscure(
        db_text(0, "SELECT value FROM config WHERE name='sync-pw:%q'",zUrl)
      );
      zUrl = zAlt;
      urlFlags |= URL_REMEMBER_PW;
      pUrlData->isAlias = 1;
    }else{
      pUrlData->isAlias = 0;
    }
  }

  if( strncmp(zUrl, "http://", 7)==0
   || strncmp(zUrl, "https://", 8)==0
   || strncmp(zUrl, "ssh://", 6)==0
  ){
    int iStart;

    free(zFile);
    zFile = 0;
    pUrlData->protocol = "file";
    pUrlData->path = "";
    pUrlData->name = mprintf("%b", &cfile);
    pUrlData->canonical = mprintf("file://%T", pUrlData->name);
    blob_reset(&cfile);
  }else if( pUrlData->user!=0 && pUrlData->passwd==0 
         && (urlFlags & URL_PROMPT_PW)!=0 ){
    url_prompt_for_password_local(pUrlData);
  }else if( pUrlData->user!=0 && ( urlFlags & URL_ASK_REMEMBER_PW ) ){
    if( isatty(fileno(stdin)) && ( urlFlags & URL_REMEMBER_PW )==0 ){
      if( save_password_prompt(pUrlData->passwd) ){
        pUrlData->flags = urlFlags |= URL_REMEMBER_PW;
      }else{
        pUrlData->flags = urlFlags &= ~URL_REMEMBER_PW;
      }
    }
  }
}

/*
** Parse the given URL, which describes a sync server.  Populate variables
** in the global "g.url" structure as shown below.  If zUrl is NULL, then
** parse the URL given in the last-sync-url setting, taking the password
** form last-sync-pw.
**
**      g.url.isFile      True if FILE:
**      g.url.isHttps     True if HTTPS:
**      g.url.isSsh       True if SSH:
**      g.url.protocol    "http" or "https" or "file"
**      g.url.name        Hostname for HTTP:, HTTPS:, SSH:.  Filename for FILE:
**      g.url.port        TCP port number for HTTP or HTTPS.